RSM12A: How To Set Up & Use

The RSM12A Two-Way Powered Stage Floor Monitor is designed for musicians, performers, public speakers, and DJs who need to hear themselves clearly during performances. This monitor can be placed on the floor for stage monitoring or mounted on a stand for added versatility.

This guide will walk you through:

• Basic setup
• Connecting a microphone or instrument
• Using the built-in EQ and feedback filter
• Connecting multiple monitors and speakers
• Live performance setup

What’s Included

• RSM12A Stage Monitor
• Power Cable
• Built-in Handles for Easy Transport
• 35mm Pole Socket for Speaker Stand Mounting

Step 1: Connecting a Microphone

The combo input jack allows you to connect XLR or 1/4-inch cables.

Using an XLR Microphone

1. Take an XLR cable.
2. Plug the female end into your microphone.
3. Plug the male end into the mic input on the monitor.
4. Press the input mode button to switch to Mic mode.
5. Turn on the monitor.
6. Raise the volume knob.
7. Turn on the microphone – You should now hear your voice from the monitor.

Using a 1/4-Inch Microphone or Instrument

• If using a quarter-inch mic or instrument, connect using an XLR to 1/4-inch cable.
• Set the input to Line mode.

Step 2: Adjusting Sound with the EQ & Feedback Filter

3-Band EQ Controls

• Low Knob: Adjusts bass frequencies.
• Mid Knob: Adjusts mid-range frequencies.
• High Knob: Adjusts treble frequencies.

Feedback Filter

The Feedback Filter helps eliminate high-pitched feedback.

1. Press the button above the knob to activate it.
2. Turn the knob to target frequencies from 300Hz to 6kHz.

Step 3: Connecting Multiple Monitors and Speakers

The Link Out Combo Jack allows you to daisy-chain multiple monitors or connect them to speakers.

Linking Two Monitors

1. Take a 1/4-inch cable.
2. Plug one end into the Link Out on the first monitor.
3. Plug the other end into the Input of the second monitor.
4. Set both monitors to Line mode.
5. Adjust volumes accordingly.

Connecting Monitors to Powered Speakers

1. Use two 1/4-inch cables.
2. Plug one end into the Link Out of each monitor.
3. Plug the other end into the Line Input of each speaker.
4. Turn on all devices and adjust levels accordingly.

Step 4: Live Performance Setup

For a full performance setup, you will need:

• A passive mixer
• Two RSM12A monitors
• Two powered speakers
• XLR and 1/4-inch cables

Connecting the Mixer to the Monitors

1. Take two XLR cables.
2. Plug the female ends into the main XLR outputs on your mixer.
3. Plug the male ends into the Input of each monitor.
4. Set monitors to Line mode.

Connecting the Monitors to the Speakers

1. Use two 1/4-inch cables.
2. Plug one end into the Link Out on each monitor.
3. **Plug the other end into the Line Input on each powered speaker.

Final Setup Steps

1. Turn on the mixer.
2. Turn on the monitors.
3. Turn on the speakers.
4. Raise the volume on all devices.
5. Raise the main faders on the mixer.
6. Test with a microphone or instrument.

Now, the monitors will allow musicians to hear themselves while the speakers project sound to the audience.

Conclusion

The RSM12A Two-Way Powered Stage Monitor is a powerful and flexible monitoring solution for live performances. With multiple connection options, built-in EQ, and a feedback filter, it ensures clear and professional sound on stage.

Now that your RSM12A is set up, enjoy your performances with crystal-clear monitoring!