ROCKHAZE 700 V2: How To Set Up Haze Machine with Remotes & DMX Connectivity

Introduction:

In this guide, we’ll walk you through the quick and easy setup of the Rockville Rock Haze 700 DMX Haze Machine. Whether you’re using it for concerts, club lighting, or live events, this haze machine delivers powerful performance in a compact form. No technical experience needed—just follow the steps below.

Requirements:

• Rock Haze 700 DMX Haze Machine
• Haze fluid (not included)
• Wired or wireless remote (included)
• Optional: DMX controller

Step-by-Step Instructions

1. Unpack and Position the Machine

• Place the Rock Haze 700 on the floor using its rubber feet, or mount it on a truss using the included handle.
• Use the carry handle on top to move the unit easily.

2. Fill the Fluid Tank

• Open the cap of the 1.2-liter built-in tank.
• Fill with compatible haze fluid.
• Use the fluid level indicator to stay between the “Min” and “Max” lines.
• The tank features a non-spill fluid gasket for clean filling.

3. Power On the Machine

• Plug the unit into a standard power outlet.
• Switch the machine on using the rear power switch.
• Wait a few minutes for the unit to heat up.

4. Control Options

You have three ways to control the Rock Haze 700:

Option A: Wired Remote (included)

• Connect the wired remote to the control input.
• Use the following knobs and buttons:
  • Fan Speed (Green Knob): Controls how far the haze is thrown.
  • Output Volume (Red Knob): Controls the density of the haze.
  • Duration (Yellow Knob): Works with the timer button to set spray duration.
  • Timer Button: Activates timed haze bursts.
  • Manual Button (Green): Hold to spray haze; release to stop.
  • Continuous Button (Red): Press to keep haze flowing continuously.

Option B: Wireless Remote (included)

• Plug the wireless receiver into the back of the machine.
• The receiver has a magnetic base so you can place it securely on the machine.
• Use the wireless remote functions:
  • Button A: Manual hazing
  • Button B: Continuous hazing
  • Up Arrow: Increase output
  • Down Arrow: Decrease output

Option C: DMX Control

• Connect the Rock Haze 700 to a DMX controller using DMX IN and OUT ports.
• It uses 2 DMX channels and can be chained with other DMX-compatible devices.

5. Using the LCD Display

• Use the digital display on the back of the unit to toggle settings and switch between operating modes.

Troubleshooting & FAQs

Q: Why isn’t any haze coming out?

• Check if the unit has fully warmed up.
• Ensure there is enough fluid in the tank.
• Make sure the output knob is turned up.
• For wireless remote: check that the receiver is plugged in and has line of sight.

Q: How do I know when to refill the fluid?

• Refer to the fluid level indicator marked with “Min” and “Max.”

Q: Can I use fog fluid instead of haze fluid?

• No. Use only haze-specific fluid to avoid damaging the machine.

Q: What does the fan speed control do?

• It determines how far the haze is pushed into the room.

Conclusion

The Rockville Rock Haze 700 is a powerful, easy-to-use haze machine ideal for enhancing lighting effects in large spaces. With flexible control options and a user-friendly design, it’s perfect for DJs, live performers, and club owners.