SABER CHARGING CASE: How To Set Up, Charge & Transport

Introduction:

This guide walks you through the simple setup process for your Rockville Rock Saber charging case. Whether you're a DJ, event professional, or just setting up for your next gig, these steps are beginner-friendly and require no technical experience.

What You’ll Need:

• Rock Saber Charging Case (holds up to 8 lights)
• Power cable (included)
• Rock Saber lights and chargers

Step-by-Step Instructions:

1. Familiarize Yourself with the Case Features

• Wheels: Located on both sides for easy transport.
• Handles: On the top and side for easy carrying.
• Butterfly Locks: Secure the case shut. Includes rings for padlocks (not included) for added security.
• Internal Storage Compartment: Holds your remotes, chargers, and accessories.
• Charging Ports: 8 built-in power outlets inside the case for charging each light.

2. Position the Chargers and Lights

• Lay a charger into one of the 8 designated slots.
• Place a Rock Saber light on top of the charger.
• Insert the adapter plug into the charging port on the light.
• Plug the other end of the charger into one of the case’s internal power outlets.
• Repeat for all remaining lights.

3. Connect the Power Cable

• Plug the female end of the included power cable into the external power socket on the case.
• Plug the male end into a standard wall outlet.

4. Power On and Begin Charging

• Locate the power switch on the outside of the case.
• Flip the switch to start charging all connected lights.

5. Important Safety Note

• Do not close the case while lights are charging.
• Leaving the case open prevents overheating, which can damage both the lights and the case.

Troubleshooting & FAQs

Q: Why aren't my lights charging?

• Make sure each charger is properly connected to both the light and the internal power outlet.
• Confirm the external power cable is plugged into a live outlet and the case power switch is turned on.

Q: Can I transport the lights while they’re charging?

• No. Always keep the case open during charging and never move the case while plugged in.

Q: What accessories fit in the storage compartment?

• The storage compartment is ideal for holding remotes, charging adapters, and any small accessories related to your Rock Saber setup.

Conclusion:

Setting up your Rock Saber case is fast and hassle-free. Just connect the chargers, plug in the case, and power it on—your lights will be ready to go in no time.