Introduction
This guide will walk you through the simple setup process for the Rockville RockBar home theater soundbar system. The RockBar includes a 40-inch soundbar and a 6.5-inch wireless subwoofer, delivering a powerful and immersive audio experience. Whether you’re connecting via Bluetooth, optical, HDMI, or AUX, the steps are easy to follow—even if you have no technical experience.
You’ll need:
- A RockBar soundbar and subwoofer
- Power outlets for both units
- The included accessories: remote control, 3.5mm to RCA cable, wall-mount hardware
Step 1: Powering the System
- Plug both the soundbar and the subwoofer into wall outlets.
- When powered, the soundbar will show two blinking lines, indicating standby mode.
- Turn it on using the power button on the soundbar or the standby button on the remote.
Step 2: Understanding Inputs and Modes
The RockBar supports multiple input options:
- Bluetooth (wireless pairing with smartphones, tablets, etc.)
- USB (play media directly from a USB stick)
- AUX (3.5mm)
- Optical (recommended for TV connection)
- HDMI ARC (recommended for TVs with HDMI Audio Return Channel)
Switch between modes using the Input button on the remote.
- “BT” = Bluetooth
- “OP” = Optical
- “HD” = HDMI ARC
- “UX” = AUX
- USB mode activates automatically when a USB stick is inserted.
Step 3: Bluetooth Connection
- Select Bluetooth mode on the Rock Bar.
- Open your device’s Bluetooth settings and pair with “Rock Bar.”
- A chime will confirm successful pairing.
- The soundbar and subwoofer automatically connect wirelessly. If they ever disconnect, press the WPS button on the subwoofer to re-sync.
Step 4: Using the Remote Control
- Adjust treble and bass using the two-band EQ.
- Control system volume (affects both the soundbar and subwoofer).
- Choose from four EQ presets to optimize sound for movies, music, or general listening.
- When connected via Bluetooth, your device’s volume will sync with the Rock Bar. (Note: This does not apply when using AUX connections.)
Step 5: Connecting to a TV
Option A: Optical Connection
- Plug an optical cable into your TV’s Optical Out port.
- Connect the other end to the Rock Bar’s Optical In port.
- On the remote, switch input mode to “OP.”
- On your TV:
- Go to Sound Settings → Select Audio Out/Optical instead of TV speakers.
- Set Audio Format to PCM for proper stereo sound.
Option B: HDMI ARC Connection
- Confirm your TV has an HDMI ARC port.
- Plug one end of an HDMI cable into your TV’s HDMI ARC Out port.
- Plug the other end into the Rock Bar’s HDMI In port.
- On your TV:
- Set sound output to HDMI ARC.
- In advanced settings, set HDMI Audio Format to PCM.
- Once set, your TV remote will also control the Rock Bar’s volume.
Step 6: Mounting or Placement
- The RockBar has rubber feet for tabletop use.
- For wall mounting:
- Measure the distance between the mounting holes on the back of the soundbar.
- Mark and drill holes in the wall.
- Insert the provided plastic anchors into the wall.
- Partially screw in the included screws (leave them slightly out).
- Slide the Rock Bar’s grooves onto the screws until secure.
- A built-in groove allows for hidden cable management during professional installations.
Troubleshooting & FAQs
Q: The soundbar and subwoofer aren’t syncing. What do I do?
A: Press the WPS button on the subwoofer to re-sync them.
Q: My TV is connected but no sound comes through.
- Check that the correct input mode (Optical or HDMI) is selected.
- Ensure your TV audio settings are switched from “TV speakers” to the correct output.
- Set the TV audio format to PCM.
Q: The remote isn’t working.
- Make sure the batteries are installed correctly.
- Try pointing it directly at the soundbar’s sensor.
Q: Can I control the volume with my TV remote?
- Yes, if you connect via HDMI ARC.
Conclusion
Setting up your Rockville RockBar soundbar is quick and easy. With wireless subwoofer pairing, multiple input options, and flexible mounting choices, you’ll enjoy enhanced sound for music, movies, and TV.
Comments
0 comments
Article is closed for comments.