WET PAR WC PACKAGE: How To Charge

Introduction

This article provides a simple, step-by-step guide to wirelessly charging your Rockville Wet Par WC lights in the Wet Par WC charging case. The WET PAR WC PACKAGE is designed to streamline your process of storing and charging your rechargeable wash lights for the next gig. The instructions are designed for users of all experience levels, with clear explanations and troubleshooting tips. 

Requirements:
✅Rockville WET PAR WC PACKAGE (available in Black or White)
✅Wireless Charging Case
✅AC Power Cable
✅Access to AC Power (via a wall outlet)

Step-by-Step Instructions:

1. Preparing the Equipment
   • Locate your Wet Par WC Six Pack case and the included power cable.
   • Set the power cable aside for now.
2. Placing the Lights in the Case
   • Take each light and place it into one of the pockets inside the case.
   • Ensure all lights are securely seated in their respective pockets.
3. Connecting the Power Cable
   • Take the power cable and plug one end into the power socket on the side of the case.
   • Plug the other end of the cable into a wall outlet.
     • Extension cables(12 Gauge or thicker recommended) can be used, however it is NOT recommended to connect the power cable to a multi-outlet power strip.
4. Turning on the Charging System
   • Locate the power switch on the side of the case.
   • Flip the power switch to the ON position.
5. Monitoring the Charging Process
   
   • Once powered on, the LED indicators in the middle of the case will light up.
   • A red LED means the corresponding light is currently charging.
   • When the LED turns green, that light is fully charged and ready for use.

Troubleshooting & FAQs

The lights are not charging or the LEDs do not light up. What should I do?
✅Confirm that the power switch on the case is turned ON.
✅Ensure the power cable is securely connected to both the case and the wall outlet.
✅Try a different wall outlet (or swapping out extension cable) to rule out power issues.

The LED indicators stay red and do not turn green.
✅Charging times may vary; allow more time for the lights to fully charge.
✅If the LEDs never turn green, check that the lights are properly seated in their pockets.
✅If the issue persists, unplug and replug the power cable and restart the process.
✅For instances of repeated failure to charge, please Contact Rockville Tech Support for further assistance.

Can I use the lights while they are charging?
✅It is recommended to wait until the LEDs turn green before using the lights for optimal performance.

Conclusion

Hopefully at this point, charging your WET PAR WC PACKAGE seems like a straightforward, easy process that can save you time and effort. By following the steps above, you can ensure your lights are charged and ready for use every time.