How To Set Up Your Rockville Elite 5 Speakers

Introduction:

This article provides a step-by-step guide to setting up your Rockville Elite 5 speakers. Whether you’re a beginner or have no technical experience, these instructions are simple and easy to follow. You’ll learn how to connect your speakers, use the included remote, and configure various input options. Before you begin, make sure you have the following:

• Rockville Elite 5 speakers (active and passive)
• Power cable
• Speaker cable
• RCA to AUX cable
• Remote control (with a pair of AAA batteries)
• Owner’s manual (for reference)
• Compatible devices (laptop, tablet, TV, microphones, etc.)

Step-by-Step Instructions

1. Unboxing and Identifying Components
   • The package includes two speakers: one active (with controls and inputs/outputs) and one passive.
   • Accessories: power cable, speaker cable, RCA to AUX cable, remote control, and owner’s manual.
2. Powering the Active Speaker
   • Plug the AC end of the power cable into the AC input on the back of the active speaker.
   • Connect the other end to a wall outlet or power source.
3. Connecting the Active and Passive Speakers
   • Use the provided speaker wire. One end has a connector, the other is a bare wire.
   • Plug the connector end into the back of the active speaker (red wire to right/positive, black wire to left/negative).
   • Insert the bare wire end into the corresponding ports on the passive speaker (press down to open the ports, then insert wires).
4. Powering On
   • Flip the power switch on the back of the active speaker to turn the system on.
5. Understanding Inputs and Outputs
   • Coaxial Input: For devices like DVD or CD players with coax output.
   • RCA Output: To connect additional speakers or subwoofers.
   • AUX Input: For devices with AUX output (e.g., TV, DVD, CD players).
   • USB/SD/Bluetooth Controls: Use the buttons to play/pause, adjust volume, and skip tracks.
   • Microphone Inputs: Two quarter-inch inputs for connecting up to two microphones.
   • USB-A and Micro SD Inputs: For playing music from USB drives or SD cards.
   • Optical Input: For devices with optical output (e.g., TV, gaming console).
6. Using the Controls on the Active Speaker
   • Power LED: Indicates if the speaker is on.
   • Volume Knob: Adjusts overall volume.
   • Treble and Bass Knobs: Adjust high and low frequencies.
   • Headphone Jack: Connect headphones directly.
   • Mode Button: Switches between input sources (AUX, Bluetooth, Optical, Coaxial, USB, SD).
7. Switching Input Modes
   • Use the mode button to cycle through available input sources.
   • The display behind the speaker grill shows the current mode.
   • Remove the grill for a clearer view if needed.
8. Connecting via Bluetooth
   • Set the speaker to Bluetooth mode using the mode button.
   • On your device, go to Bluetooth settings, find “Elite 5,” and pair.
   • A sound will confirm successful pairing.
9. Using USB or SD Card
   • Insert a USB drive or SD card; the speaker will automatically switch to the correct mode and play music.
10. Using the Remote Control
    • Insert AAA batteries into the remote.
    • Use the remote to change sources, adjust volume, bass, treble, and microphone settings.
    • Access EQ presets (e.g., Rock, Pop, Classic) using the EQ button.
11. Setting Up Microphones
    • Connect a microphone using a female XLR to quarter-inch cable.
    • Plug the cable into one of the microphone inputs.
    • Use the mic menu controls to adjust volume, treble, bass, echo, and delay.
    • The same settings apply to both microphones if two are connected.

Troubleshooting & FAQs

Q: The remote control isn’t working. What should I do?

• Ensure you have inserted a fresh pair of AAA batteries.
• Point the remote directly at the active speaker.

Q: There’s no sound from the passive speaker.

• Check the speaker wire connections (red to positive, black to negative).
• Ensure the active speaker is powered on.

Q: My Bluetooth device can’t find the speakers.

• Make sure the speaker is in Bluetooth mode.
• Ensure no other device is currently paired.
• Restart Bluetooth on your device and try again.

Q: No sound from the optical input.

• Remove the protective cover from the optical port.
• Set your TV or device output to “Optical” and audio format to “PCM.”

Q: How do I reset the EQ settings?

• Use the EQ button on the remote to cycle through and select your preferred preset.

Conclusion

Setting up your Rockville Elite 5 speakers is straightforward and can be completed in just a few steps. This guide covers everything from initial connections to using advanced features like Bluetooth and EQ presets.