FIVE-EYE: Controls, Inputs & Outputs

Introduction

This guide explains the controls, inputs, outputs, and operating modes on your Rockville Five Eye Light. Whether you are using the light for DJ events, stage performances, parties, or club lighting, this article will help you understand how to operate the fixture and customize its effects.

The instructions are simple and easy to follow, even for beginners with no lighting experience.

What You’ll Need

• Rockville Five Eye Light 
• Included PowerCon power cable 
• Power source 
• DMX controller and DMX cables (optional) 

Power Connections

Power In Socket

The Power In socket is used to power the light using the included PowerCon cable.

To Connect Power

1. Locate the Power In socket on the back of the fixture. 
2. Take the blue end of the included PowerCon cable. 
3. Insert it into the Power In socket. 
4. Twist the connector until it locks into place. 
5. Listen for the click to confirm it is secure. 
6. Connect the other end to a power outlet. 

Once connected, the light powers on automatically.

Power Out Socket

The Power Out socket allows you to daisy chain power to additional lighting fixtures.

Benefits of Power Daisy Chaining

• Reduces cable clutter 
• Simplifies truss installations 
• Allows multiple fixtures to share a power source 

DMX Inputs and Outputs

The Five Eye Light includes:

• DMX In 
• DMX Out 

These connections are used for DMX lighting control.

DMX In

Use DMX In to receive a signal from:

• A DMX controller 
• Another lighting fixture 

To Connect DMX In

1. Connect a DMX cable from your controller or previous fixture. 
2. Plug the cable into the DMX In port. 

DMX Out

Use DMX Out to send a DMX signal to another fixture.

To Daisy Chain Lights

1. Connect a DMX cable to the DMX Out port of the master fixture. 
2. Connect the other end to the DMX In port of the next light. 

Display and Control Buttons

Display Screen

The display shows:

• Current mode 
• DMX address 
• Settings and menu options 

Control Buttons

Menu Button

Used to cycle through menus and operating modes.

Up and Down Buttons

Used to:

• Change settings 
• Select modes 
• Adjust values 

Enter Button

Used to save settings and confirm selections.

DMX Channel Modes

The Five Eye Light supports multiple DMX channel modes.

7-Channel DMX Mode

Display:

• A001 

This mode allows control using 7 DMX channels.

Features

• Simple DMX setup 
• Basic fixture control 
• Uses 7 faders on a DMX controller 

To Set the DMX Address

1. Enter the A001 menu. 
2. Use the Up and Down buttons to choose the address. 
3. Press Enter to save. 

19-Channel DMX Mode

Display:

• H001 

This mode allows advanced control using 19 DMX channels.

Features

• Expanded lighting control 
• More detailed programming 
• Uses up to 19 controller faders 

To Set the Address

1. Enter the H001 menu. 
2. Adjust the DMX address using Up and Down. 
3. Press Enter to save. 

15-Channel DMX Mode

Display:

• h001 

This mode uses 15 DMX channels.

Features

• Mid-level fixture control 
• Additional programming flexibility 

To Configure

1. Enter the h001 menu. 
2. Select the DMX address. 
3. Press Enter to save. 

Auto Mode

The light includes built-in automatic lighting sequences.

Selecting Auto Programs

1. Navigate to Auto Mode. 
2. Use the Up and Down buttons to select a sequence. 
3. Press Enter to save. 

Available Programs

• Auto sequences 00–15 
• Auto Mode 15 acts as a color fade mode 

Adjusting Auto Mode Speed

You can control how fast the automatic lighting effects run.

To Change Speed

1. Enter the Speed menu. 
2. Use the Up and Down buttons to adjust speed. 
3. Higher values increase effect speed. 
4. Press Enter to save. 

Sound Active Mode

The Five Eye Light can react to music and sound.

Sound Mode Features

• Responds to beats and audio 
• Includes 5 sound-reactive modes 

To Use Sound Mode

1. Enter the Sound Mode menu. 
2. Use Up and Down buttons to select a mode. 
3. Press Enter to save. 

The light will now react to surrounding sound and music.

Manual Color Control

The fixture includes separate dimmers for:

• Red 
• Green 
• Blue 

These controls allow you to create custom colors.

Adjusting the Red Dimmer

Display:

• R000 

To Adjust Red

1. Navigate to the Red Dimmer menu. 
2. Use Up and Down buttons to adjust brightness. 
3. Press Enter to save. 

Adjusting the Green Dimmer

To Adjust Green

1. Navigate to the Green Dimmer menu. 
2. Adjust the brightness level. 
3. Press Enter to save. 

Adjusting the Blue Dimmer

To Adjust Blue

1. Navigate to the Blue Dimmer menu. 
2. Adjust the brightness level. 
3. Press Enter to save. 

Creating Custom Colors

By combining:

• Red 
• Green 
• Blue 

You can create a wide variety of custom colors and lighting effects.

Troubleshooting & FAQs

The Light Will Not Power On

Check the Following

• PowerCon cable is fully inserted 
• Connector is twisted and locked 
• Power outlet is working 
• Cable is securely connected 

DMX Controller Is Not Responding

Solutions

• Confirm DMX cables are connected correctly 
• Verify the correct DMX address is selected 
• Make sure the controller and fixture use the same DMX mode 
• Check cable connections between fixtures 

The Light Is Not Reacting to Music

Solutions

• Make sure the fixture is in Sound Mode 
• Increase nearby music volume 
• Select a different sound-reactive mode 

Auto Effects Are Moving Too Fast or Too Slow

Solution

Adjust the speed setting in the Speed menu.

Higher numbers create faster movement effects.

My Colors Do Not Look Correct

Solutions

• Adjust the Red, Green, and Blue dimmers individually 
• Reset dimmer levels and try again 
• Confirm no DMX signal is overriding manual settings 

Conclusion

The Rockville Five Eye Light offers flexible lighting control with multiple DMX modes, automatic programs, sound-reactive effects, and customizable color mixing. With power daisy chaining, DMX connectivity, and simple onboard controls, the fixture can easily adapt to live events, DJ performances, stage productions, and party lighting setups.