RVMIC4 V2: How To Set Up with Smartphone / Tablet Holder

Introduction

In this guide, we'll walk you through how to set up your smartphone or tablet with the Rockville RVMIC4 V2 stand. This setup is perfect for reading lyrics or notes while on stage, keeping your device organized and within reach.

Step-by-Step Instructions

Step 1: Attach the Smartphone or Tablet Holder

1. Align the Holder:
   • Take the smartphone or tablet holder and align the threading with the top of the stand.
2. Screw the Holder:
   • Screw the holder onto the stand securely, ensuring it is firmly attached.

Step 2: Adjust the Holder Position

1. Loosen the Knob:
   • Loosen the knob on the side of the holder to allow adjustments.
2. Position the Holder:
   • Angle and position the holder in the best spot for your device.
3. Tighten the Knob:
   • Once you have the desired position, tighten the knob to lock the holder in place.

Step 3: Keep Your Phone Charged (Optional)

1. Use the Wire Clip:
   • If you need to charge your device while it’s on the stand, use the wire clip to neatly organize and keep the charging cable in place.

Step 4: Adjust the Height of the Stand (Optional)

1. Use the Hand Clutch:
   • Use the hand clutch to adjust the height of the stand to your preference. Release the clutch when you reach the desired height, and the stand will lock into place.

Conclusion

Setting up your smartphone or tablet on the Rockville RVMIC4 V2 is easy and provides convenient access to your device while performing. With adjustable positioning and wire management, you can read notes, lyrics, or anything else while keeping your setup clean and efficient.