RVMIC3 V2: How To Set Up w/ An ISOBOX

Introduction

This guide will walk you through the steps to attach an ISO box to your Rockville RVMIC3 V2 stand, elevating your home studio setup. An ISO box helps isolate your microphone, improving sound quality by reducing external noise and vibrations.

Step-by-Step Instructions

Step 1: Remove the Boom Arm

1. Loosen the Boom Arm:
   • Start by loosening and removing the boom arm from the stand.

Step 2: Use the 3/8" Threading

1. Find the 3/8" Threading:
   • After removing the boom arm, you will notice the 3/8" threading at the top of the stand. This will be used to mount the ISO box.
2. Attach the 5/8" Threading:
   • Take the 5/8" threading from the boom arm and screw it onto the 3/8" threading on the stand.

Step 3: Attach the ISO Box

1. Find the Attachment Piece:
   • Inside the ISO box, locate the black attachment piece. This will be used to attach the ISO box to the stand.
2. Align the Opening:
   • Underneath the ISO box, you will see an opening that aligns with the threading on the top of the stand.
3. Attach the ISO Box:
   • Line up the attachment piece inside the ISO box with the threading on the stand and screw it on securely.
4. Close the ISO Box:
   • Once the ISO box is mounted, you can close it up and ensure everything is secured.

Step 4: Adjusting the ISO Box

1. Quick Release Clutch:
   • Use the quick release clutch on the stand to easily raise or lower the ISO box to your desired height.

Conclusion

Attaching your ISO box to the RVMIC3 V2 stand is a straightforward process that significantly enhances your home studio setup. The quick-release feature makes it easy to make adjustments as needed.