HOUSE PARTY SYSTEM 10: How to Set Up & Use – Rockville Audio

Introduction:
This article will guide you step-by-step through setting up and using the Rockville House Party System 10. Whether you're planning a karaoke night, backyard movie, or dance party, these easy instructions will help you get your system up and running fast. No technical experience is needed.
Requirements:

Rockville House Party System 10 (active + passive speakers)
Included power cable, speaker link cable, and remote
Optional: microphone, Bluetooth-enabled device, aux cables, USB/SD card

Step-by-Step Instructions:

1. Connect Power to the Active Speaker

Locate the included power cable (standard IEC cable).
Plug the female end into the AC Input on the back of the active speaker.
Plug the male end into a wall outlet.

2. Link the Passive and Active Speakers

Use the included proprietary speaker cable.
Plug one end into the “Output” port on the active speaker.
- Line up the grooves, push it in, and twist to lock.
Plug the other end into the input on the passive speaker the same way.

3. Power On the System

Press the power button on the back of the active speaker.
The system enters standby mode automatically.
Press the “Standby” button under the LCD display to wake the unit.

4. Select Input Mode

Use the input select button or the remote to cycle through these modes:

BT (Bluetooth) – Default mode for wireless music streaming.
OP (Optical) – Connect to TVs, projectors, gaming consoles.
COA (Coaxial) – For coaxial digital input.
PC – 3.5mm aux input (connect phones, tablets, PCs).
AUX1/AUX2 – RCA analog inputs.
FM – FM radio (connect the included antenna for better reception).
USB/SD – Play media directly from a USB drive or SD card.

5. Pairing Bluetooth Devices

Set input mode to BT.
Open Bluetooth settings on your device and select “House Party System 10.”
A chime confirms a successful connection.

6. Using a Microphone (Karaoke Setup)

Plug a microphone into either Mic 1 or Mic 2 (1/4" inputs).
Adjust the mic volume and echo level:
- Use the menu button on the unit or
- Use the Mic+/Mic- and Echo+/Echo- buttons on the remote.
Volume range: 0–30
Echo adds a reverb effect—ideal for karaoke.

7. Karaoke with an iPad or Tablet

Pair your iPad with the system via Bluetooth.
Open the YouTube app and play a karaoke version of a song.
Plug in and activate your mic.
Adjust mic and echo settings as needed.
Sing along while lyrics display on your tablet.

8. Adjusting Sound Settings

Use the menu button to access:
- T = Treble EQ
- B = Bass EQ
- Mic Volume
- Mic Echo
- Master Volume
Or use the remote control to:
- Change EQ presets
- Adjust treble and bass
- Change input source
- Control volume and mic settings

9. Using USB or SD Card for Playback

Insert a USB drive or SD card with music files into the designated ports above the mic inputs.
The system will automatically recognize and play the media.

10. BeatSync RGB LED Light Features

The speakers feature built-in RGB LEDs that flash in sync with your music.
The lights get brighter and more dynamic as the volume increases.
To disable the lights, use the “Lights” switch on the back of the active speaker.

Troubleshooting & FAQs:

Q: I hear no sound from one speaker.

Ensure the speaker cable is properly connected and locked on both ends.

Q: My Bluetooth device won’t connect.

Make sure the system is in BT mode.
Confirm Bluetooth is enabled on your device.
Restart both the system and your device if needed.

Q: The mic has no echo.

Ensure echo level is turned up via the menu or remote.
Make sure the mic is connected to the right input and turned on.

Q: Can I use this with my TV?

Yes. Use the optical or coaxial input for best results.

Q: How do I know if I'm connected via Bluetooth?

You’ll hear a chime and see the device name in your Bluetooth list.

Conclusion:
Setting up your Rockville House Party System 10 is simple, whether you're hosting a karaoke night, movie event, or just streaming music. Use the variety of input options, light effects, and remote controls to customize your experience.