ISTAND G20: How To Use For a Second Monitor

Introduction

The Rockville iStand G20 is a flexible gooseneck and holder combo designed to hold smartphones, tablets, and even small monitors. If you're looking to expand your workspace or studio setup, this guide will walk you through how to securely mount and position a second monitor using the iStand G20 and integrate it into your setup.

Step 1: Attaching the Holder to the Gooseneck

1. Take the tablet/monitor holder and align it with the top of the gooseneck.
2. Screw the holder onto the gooseneck by rotating it clockwise until it is firmly attached.
3. Ensure the holder is securely in place before proceeding to mount your monitor.

Step 2: Mounting the Monitor

1. Position the Holder Vertically:
   • For best results, orient the holder vertically while keeping your monitor horizontal.
2. Insert the Monitor:
   • Place the bottom edge of the monitor against the lower wing of the holder.
   • Stretch the top wing upward until the monitor snaps securely into place.
   • Release the wing to grip the monitor firmly.
3. Reposition If Needed:
   • You can tilt or rotate the monitor using the ball joints on the holder.
   • Adjust the angle for optimal viewing based on your setup.

Step 3: Connecting the Monitor to Your Computer

1. Use an HDMI, DisplayPort, or USB-C cable (depending on your monitor’s input).
2. Connect the monitor to your PC or laptop.
3. Adjust your display settings on your computer to extend or mirror the screen.

Conclusion

The Rockville iStand G20 makes it easy to set up a second monitor for productivity, gaming, or music production. With its adjustable gooseneck and sturdy holder, you can position your monitor at the perfect angle for your workspace.