RTP33-TV: How To Set Up & Use

Introduction

The Rockville RTP33 TV Pro Totem Stand is a versatile stand that can be used to mount a TV, speaker, or lighting fixture, making it perfect for DJs, live events, and professional setups. This guide will walk you through assembling the totem stand, attaching the TV mount, and adding additional accessories like speakers and lighting.

What's Included

• Large Base Plate (for stability)
• Small Top Plate (for mounting accessories)
• Two Main Legs
• Four Cross Brace Supports
• Attachable Pole Mount (for speaker mounting)
• TV Mounting Components:
  • Main Bar
  • Two Bracket Pieces (attach to the TV)
  • Two Arm Pieces (connect the TV to the totem stand)
• Carrying Bags:
  • Large Bag (for base plates and large components)
  • Small Bag (for smaller components like the TV mount)
• Black and White Scrims (for a clean, professional look)
• All necessary screws, bolts, nuts, and washers

1. Assembling the Totem Stand

This is the foundation of your setup, so ensure everything is securely fastened.

Step 1: Attach the Legs to the Base Plate

You'll need: Two Main Legs Two Cross Braces Large Base Plate Four Washers & Screws (ME Screws) Flathead Screwdriver

1. Align the first leg with the two holes on the base plate.
2. Insert two ME screws through the washers and into the base plate.
3. Attach a cross brace to the screws for added stability.
4. Tighten the screws using a screwdriver.
5. Repeat for the second leg, making sure it fits between the braces.

Your stand should now have two legs, connected with braces for extra support.

Step 2: Attach the Top Plate

You'll need: Small Top Plate Four Black Screw Knobs Four MG Washer Pieces Attachable Pole Mount

1. Align the small top plate with the four holes at the top of the legs.
2. Insert MG washer pieces through the black screw knobs.
3. Secure the top plate by screwing the knobs into place.
4. Attach a cross brace at the top for extra stability.

Now your totem stand structure is fully assembled.

Step 3: Install the Pole Mount (for Speaker Mounting)

• Loosen the screw knob on the pole mount.
• Insert the pole mount into the hole on the top plate.
• Tighten the screw knob to secure it.
• This allows you to mount a speaker on top of the totem stand.

Step 4: Adjust the Totem Stand Height

The RTP33 TV Pro allows height adjustments using latches inside the legs.

• To raise the stand:
  • Pull on the rings inside the legs.
  • Turn the ring clockwise to secure it at a higher position.
• To lower the stand:
  • Pull on the rings and return them to the groove.
  • You'll hear a click when the height locks in place.

2. Attaching the TV Mount

You'll need: Main Bar Two Arm Pieces Four Large Washer Pieces Four Medium-Sized Bolts with Flatheads Four Nuts Included Wrench

Step 1: Assemble the TV Mount

1. Attach the arm pieces to the main bar.
2. Insert the bolts through the square holes on the bar.
3. Ensure the square part of the bolts fits snugly inside the holes.
4. Secure with washers and nuts on the back.
5. Tighten using the wrench to lock the structure in place.

Step 2: Attach the TV to the Mount

You'll need: Two Bracket Pieces Four MF Washers & Four MH Screws

1. Ensure your TV has four screw holes on the back.
2. Line up the bracket pieces to the holes.
3. Use MF washers & MH screws to secure them.
4. Tighten with a screwdriver to ensure stability.

Step 3: Attach the TV to the Totem Stand

1. Align the TV mount arms with the bridge on the top of the totem stand.
2. Loosen the screw knobs under the bridge.
3. Slide the mount through the bridge’s gaps.
4. Hold the TV in place and tighten the screw knobs.
5. For added security, use:
   • Four long flathead bolts
   • Four small washers & nuts
   • Wrench to tighten.

If using a large or heavy TV, have someone assist you!

3. Adding Accessories (Scrims, Lighting, & Speakers)

Installing the Scrim (for a Professional Look)

1. Slip the scrim over the stand (like a shirt).
2. Ensure the two holes face the front.
3. Tuck any slack neatly at the bottom.

Adding a Light for an Illuminating Effect

1. Use a battery-powered PAR light (e.g., Rockville Battery PAR 50).
2. Turn the light on and place it inside the totem stand.
3. Pull the scrim down for a clean, glowing effect.

Mounting a Speaker on Top

1. Align the speaker’s bottom hole with the pole mount.
2. Secure the speaker using the knob on the back.

Conclusion

The Rockville RTP33 TV Pro Totem Stand is a versatile, multi-functional stand that can support TVs, speakers, and lighting effects all in one unit. Whether you're using it for a DJ setup, event space, or trade show, it provides a professional, sleek appearance with easy height adjustment and secure mounting options.