RMC-3PK: How To Set Up & Use

Introduction

The Rockville RMC-3PK Microphone 3-Pack is perfect for recording setups, podcasts, speaking events, live performances, and more. This pack comes with three microphones, three mic clips, and an aluminum carry case, making it convenient for gigs, sessions, or events. This guide will show you how to set up the microphones for both live performances and recording purposes.

What You’ll Need

• RMC-3PK Microphone 3-Pack
• 3 Microphone Stands
• 3 Mic Clips (included)
• XLR Cables (not included)
• Mixer or Audio Interface
• Powered Speakers (for live setup)
• Computer with DAW (for recording setup)

Step-by-Step Instructions

1. Set Up the Mic Clips on Stands

• Attach the Mic Clips:
  Each mic clip comes with an adapter piece to fit different types of stands. For this setup, leave the adapter off and simply screw the mic clip onto the stand.
• Position the Microphones:
  Insert each microphone into the clips once the clips are secured to the stands.

2. Connect the Microphones to XLR Cables

• Plug in the XLR Cables:
  Take the female end of the XLR cable and plug it into the base of each microphone.
• Connect to a Mixer or Interface:
  Plug the other end of each XLR cable into a different channel on the mixer or audio interface.

3. Set Up for Live Performance

• Connect to Mixer:
  Plug the XLR cables into three different channels on the mixer. For example, use channels 1, 2, and 3.
• Adjust the Gain:
  Raise the gain on each mic channel.
• Set the Volume Faders:
  Raise each channel’s volume fader to the desired level.
• Raise the Main Faders:
  Adjust the main left and right faders on the mixer to send the microphone signal to the speakers.
• Turn On the Microphones:
  Use the built-in on/off switch on each microphone to turn it on and begin using it. You should now hear your voice coming through the speakers.

4. Set Up for Podcasting or Recording

• Connect to Audio Interface:
  Plug the XLR cables into three different channels on your audio interface. Use channels 1, 2, and 3.
• Raise the Gain:
  Set the gain on the interface for each microphone input.
• Create Tracks in Your DAW:
  Open your DAW (GarageBand, Audacity, Logic, Pro Tools, etc.), create three separate tracks for the microphones, and record-enable each track.
• Test the Signal:
  Ensure the signal is coming through by checking each track for input. You should see the signal come through in the DAW once everything is connected.

5. Optional: Use a Pop Filter

• Attach the Pop Filter:
  If you want to reduce plosive sounds while recording, attach a pop filter to the mic stand.
  • Line up the clamp of the pop filter to the stand.
  • Tighten the knob to secure the filter in place.
  • Position the filter just in front of the microphone.

6. Test the Setup

• Start Recording:
  Begin recording on your DAW. For example, you can say a line such as “This is Perry from Rockville testing the RMC-3PK.”
• Check the Sound:
  Ensure that all three microphones are picking up sound properly and that the levels are balanced.

Conclusion

Setting up your RMC-3PK Microphone 3-Pack is straightforward and versatile, whether you’re recording a podcast, performing live, or recording instruments. With the ability to use these microphones in a variety of setups and their convenient carry case, they are perfect for both studio and live environments.