RCM01: How To Set Up w/ An IsoBox

Introduction

In this guide, we’ll show you how to take your RCM01 condenser microphone setup to the next level by connecting it to an ISO box. This setup is ideal for isolating your microphone and minimizing external noise for clearer recordings. Follow these easy steps to get your ISO box ready for use with your RCM01.

Step-by-Step Instructions

1. Attaching the Shock Mount to the ISO Box

1. Prepare the Shock Mount:
   • Take the shock mount and line up the threading on the shock mount with the threading inside the ISO box.
   • Screw the shock mount in until it’s securely attached to the box.
2. Adjust the Shock Mount:
   • Use the side knob on the shock mount to level the mic to your preferred position.

2. Mounting the Microphone

1. Secure the Microphone:
   • Pinch the clamps on the front of the shock mount to open it up.
   • Slide the RCM01 microphone into the shock mount and release the clamps to secure the mic.

3. Connecting the Microphone to Your Interface

1. Feed the XLR Cable:
   • Look at the bottom of the ISO box and locate the two openings that are wide enough to fit your XLR cable.
   • Feed the female end of the XLR cable through one of the openings and pull it through the box.
2. Connect the Cable:
   • Connect the other end of the XLR cable to your microphone, then plug the other end into your interface.

4. Blocking Plosives

To reduce unwanted plosive sounds (like "P", "T", and "K" sounds), you have a few options:

1. Wind Screen: Slide the wind screen over the microphone grill to reduce plosives.
2. Pop Filter: If you prefer, you can attach a pop filter to the mic holder inside the ISO box.
3. ISO Box Door: The front door of the ISO box has a built-in pop filter. Simply close it, and it will block out some plosive sounds.

5. Final Setup and Testing

1. Test the Setup:
   • After setting up the microphone and making sure everything is securely in place, you’re ready to start recording. The ISO box helps block out external sounds, so you can focus on capturing clean, clear vocals.

Conclusion

Setting up your RCM01 microphone with an ISO box is an easy process that can greatly improve your recording quality by isolating the mic and minimizing background noise. Whether you’re recording vocals or instruments, this setup ensures a cleaner sound.