RWM65U: How To Set Up & Use

Introduction

The Rockville RWM65U is a dual UHF wireless handheld microphone system, ideal for live performances, DJ events, houses of worship, karaoke, and more. It features automatic pairing, a long wireless range of up to 400 feet, and multiple connectivity options for both powered speakers and mixers.

This guide will walk you through the setup process, ensuring you get the best performance from your microphone system.

What’s Included

• Two-channel wireless receiver
• Two wireless handheld microphones
• Four AA batteries (for microphones)
• Power supply
• ¼-inch cable
• Two antennas (for optimal signal reception)

Step-by-Step Setup Guide

1. Setting Up the Receiver

1. Power Connection
   • Take the included power supply.
   • Plug the female end into the back of the receiver.
   • Plug the other end into a power outlet.
2. Attaching the Antennas
   • Screw the two included antennas onto the back of the receiver for optimal wireless signal reception.

2. Installing Batteries in the Microphones

1. Unscrew the bottom cover of each wireless microphone.
2. Insert two AA batteries into each microphone (facing down).
3. Screw the cover back on.
4. Repeat for the second microphone.

3. Connecting to a Powered Speaker

To hear sound from your microphones, you must connect the receiver to a powered speaker.

Option 1: Using a ¼-inch Cable

1. Ensure the speaker’s microphone volume is turned down.
2. Take the included ¼-inch cable.
3. Plug one end into the Mix Out (¼-inch output) on the back of the receiver.
4. Plug the other end into the ¼-inch Mic input on your powered speaker.
5. Turn on the RWM65U receiver.
6. The LED display on the receiver should light up.
7. Raise the volume for each microphone on the receiver using the buttons on the front panel.
8. Gradually increase the microphone volume on the speaker.
9. Turn on the microphone using the built-in power button.
10. Speak into the microphone, and your voice should now be coming from the speaker.

Alternative: Using XLR Connection

• Instead of the ¼-inch cable, you can use an XLR cable to connect from the Mix Out (XLR output) on the receiver to the XLR input on the speaker.

4. Using the Wireless Microphones

• The microphone’s LED display shows battery life and frequency settings.
• Automatic Pairing: The microphones auto-connect to the receiver, eliminating manual setup.
• Wireless Range:
  • Indoors: 300-400 feet
  • Outdoors: 250-350 feet

5. Connecting to a Mixer with Passive Speakers

If you're using a mixer and passive speakers, follow these steps:

Option 1: Using a ¼-inch Cable

1. Take the ¼-inch cable.
2. Plug one end into the Mix Out (¼-inch output) on the receiver.
3. Plug the other end into an available ¼-inch input on your mixer.

Option 2: Using XLR Cables (Recommended for More Control)

1. Take two XLR cables.
2. Plug one end of each cable into the Balanced A and Balanced B XLR outputs on the receiver.
3. Plug the other ends into two separate mic channels on your mixer (e.g., Channel 1 & Channel 2).
4. Turn on the receiver and microphones.
5. Raise the volume for each microphone on the receiver.
6. Adjust the channel faders for each microphone.
7. Raise the main left and right faders to hear the sound through your speakers.

Mixer Setup Benefits

• Independent volume control for each microphone.
• Access to EQ settings and built-in effects.

6. Adjusting Microphone Settings

1. Changing Frequency Channels

• The RWM65U uses pre-set frequencies for clear sound.
• If you experience dropouts or interference, change the frequency using the buttons on the receiver.

2. Adjusting Volume

• Adjust microphone levels using the volume buttons on the receiver.
• Adjust speaker/mixer volume accordingly.

3. Monitoring Battery Life

• The LED display on the microphone shows remaining battery life.

Conclusion

The Rockville RWM65U is an easy-to-use dual wireless microphone system designed for high-quality audio and long-range performance. Whether you're using it for a live event, karaoke, or a DJ performance, this guide ensures seamless setup and operation.

By following these steps, you can:

• Set up the receiver and microphones properly.
• Connect to a powered speaker or mixer.
• Adjust microphone settings for the best performance.
• Move freely with a wireless range of up to 400 feet.