RPG2X10 V2: How To Set Up & Use

This guide will walk you through the quick and easy setup of the Rockville RPG2X10 V2 PA system. Even if you have no technical experience, you'll be up and running in no time. This all-in-one PA system includes everything you need for live sound, karaoke, or events.

What’s Included:

• (1) Amplifier
• (2) 10" Passive Speakers
• (2) Tripod Speaker Stands
• (2) Microphones
• (2) XLR Mic Cables
• (2) Mic Clips with Pouches
• (2) 1/4" Speaker Cables

Step-by-Step Instructions

1. Set Up the Speaker Stands

• Loosen the bottom knob of the stand and spread the legs wide.
• Tighten the knob to secure the base.
• Remove the height adjustment pin.
• Loosen the top knob and raise the pole to the desired height.
• Insert the pin through the appropriate hole and tighten the knob.

Repeat for the second stand.

2. Mount the Speakers

• Grab each speaker by the top handle.
• Align the 35mm pole mount on the speaker with the stand and slide it on.
• Alternatively, use the built-in rubber feet to place speakers on the floor vertically or horizontally.

3. Connect the Speakers to the Amplifier

• Plug one end of each included 1/4" speaker cable into the back of each speaker (left/right inputs).
• Connect the other end into the amplifier’s speaker outputs.

4. Set Up the Microphones

• Take one XLR cable and plug the female end into the mic.
• Plug the male end into Input 1 or 2 on the amplifier.
• Turn on the amplifier.
• Raise the channel’s Level knob and the Master Volume.
• Turn on the mic and test with "Check 1, 2" — your voice should come through the speakers.

To use the second mic, repeat the same steps with another channel.

5. Use Mic Clips and Stands

• Attach the included mic clips to standard mic stands for hands-free use.

Mixer & Sound Controls

Channel Controls (Channels 1–4):

• Level Knob: Controls channel volume.
• Bass/Treble Knobs: Adjust low and high frequencies.
  • Increase bass for a fuller sound.
  • Increase treble for more vocal clarity.

Input Types:

• Channels 1–3: 1/4" line-level inputs (for instruments, etc.)
• Channel 4: RCA inputs (for turntables, computers, etc.)

Echo Effects:

• Each channel has its own Echo knob.
• Adjust the Echo Unit on the mixer for:
  • Level: How loud the echo is.
  • Time: How long the echo lasts.
  • Repeat: Number of echo repetitions.

Master 3-Band EQ:

• Bass, Mid, Treble: Affects overall output tone of the system.

Additional Connections

• 1/4" Line In/Out: Connect additional mixers, speakers, or subwoofers.
• RCA Line In/Out: Same function, for devices using RCA cables.
• If using Line In, be sure to raise the corresponding Line In volume knob.

MP3 Player & Bluetooth Features

MP3 Module:

• Inputs: USB & SD card
• Controls: Play/Pause, Mode, Repeat, Skip (also adjusts volume)
• Raise the MP3 Volume Knob to hear playback.

Bluetooth:

1. Press the Mode button until the screen shows “Bluetooth.”
2. Open Bluetooth settings on your smartphone or tablet.
3. Pair with the device labeled “Rockville.”
4. Raise the MP3 Volume on the mixer to hear audio.

Karaoke Functionality

• Connect your smartphone/tablet via Bluetooth.
• Open YouTube and play any karaoke video.
• Plug in one or both microphones.
• Sing along while audio plays through the speakers.
• Use the echo knob on each mic channel for added vocal effect.

Troubleshooting & FAQs

Q: I hear no sound from the mic. What should I check?

• Ensure the mic is powered on and plugged into the correct input.
• Check that both the Level and Master Volume knobs are raised.

Q: Bluetooth isn’t connecting.

• Make sure the mode is set to Bluetooth.
• Restart Bluetooth on your device and search again for “Rockville.”

Q: Audio from USB/SD isn’t playing.

• Confirm the file format is compatible (MP3).
• Make sure the MP3 knob is turned up.

Conclusion:

Setting up your Rockville RPG2X10 V2 PA system is simple and quick. Whether you're hosting a party, performing live, or singing karaoke, this system has you covered. For a visual walkthrough, check out the full video tutorial.