RPM870: How To Set Up Karaoke

Introduction

The Rockville RPM 870 mixer is a great choice for setting up a karaoke system since it allows you to:

• Connect multiple microphones for duets or group singing.
• Stream music via Bluetooth from a smartphone or tablet.
• Apply built-in effects like reverb and delay to enhance vocals.

Step 1: Connecting Your Microphone

1. Take an XLR microphone cable.
2. Plug the female end into your microphone.
3. Plug the other end into an available channel input on your RPM 870 mixer (e.g., Channel 1).
4. Raise the gain knob on the channel to ensure a proper input level.
5. Adjust the channel volume fader to your preferred level.
6. Raise the main left and right faders to send the microphone signal to your speakers.
7. Test the microphone: Turn it on and say "Check one, two" – you should hear your voice through the speakers.

Step 2: Adding Vocal Effects (Reverb & Delay)

To enhance your karaoke experience, you can add reverb and delay effects to your microphone:

1. Locate the effects processor section on your mixer.
2. Select a preset:
   • Use Preset 8 for a mix of reverb and delay.
3. Adjust effect settings:
   • Parameter 1: Controls the delay time.
   • Parameter 2: Controls the reverb time.
4. Increase the effects knob on the microphone channel to apply the effects.

Step 3: Connecting a Bluetooth Device for Karaoke Music

1. Press the Mode button on the mixer.
2. Use the Previous and Next buttons to cycle to Bluetooth mode.
3. Press the Play button to enter Bluetooth pairing mode.
4. On your smartphone or tablet, go to Bluetooth settings.
5. Search for the device "RPM 870" and select it to pair.
6. To hear the music, raise the fader for Channel 7/8.

Step 4: Playing Karaoke Tracks

1. Open YouTube or any karaoke app on your smartphone or tablet.
2. Search for a karaoke version of your favorite song.
3. Play the track and start singing along while reading the lyrics from your screen.
4. Adjust the music volume on the mixer to balance it with your vocals.
5. Use the echo and effects settings to enhance your voice.

Step 5: Troubleshooting & FAQs

Q: My microphone isn’t working. What should I check?

✔ Ensure the microphone is turned on.

✔ Make sure the XLR cable is properly connected.

✔ Raise the channel gain and volume faders.

✔ Check if the main faders are turned up.

Q: The music isn’t playing through the speakers. What should I do?

✔ Make sure Bluetooth is connected to "RPM 870".

✔ Raise the Channel 7/8 fader to allow music playback.

✔ Ensure your smartphone volume is up.

Q: How can I improve my vocal sound?

✔ Use the effects processor to add reverb and delay.

✔ Adjust the EQ settings to make vocals clearer.

✔ Keep the microphone at an appropriate distance (about 6 inches from your mouth).

Conclusion

Setting up karaoke with the Rockville RPM 870 mixer is quick and easy! With Bluetooth music streaming, multiple microphone inputs, and built-in effects, your setup is perfect for karaoke parties, live performances, and events.