Introduction:
The Rockville RPA(BT) Series Bluetooth Amplifier / Receivers (RPA60WBT V2 & RPA70WBT V2) are powerful and versatile amplifiers designed for professional audio, home entertainment, and karaoke setups. This guide will walk you through the setup process, covering speaker connections, wireless microphones, inputs, Bluetooth pairing, and sound adjustments.
What's Included:
- RPA60WBT V2 or RPA70WBT V2 Amplifier / Receiver
- Wireless Remote
- FM Radio & Microphone Signal Antennas
- Rack Ears & Screws (optional for rack mounting)
- *RPA70WBT V2 only* Two Wireless Microphones
Step-by-Step Setup:
1. Rack Mounting (Optional)
- Align the rack ears to the amplifier’s sides.
- Secure them using the included screws (optional for rack installations).
2. Powering On the Amplifier
- Turn on the amplifier using the power switch.
- The LED display & spectrum analyzer will activate, showing the active mode and audio levels.
3. Speaker Connections
The amplifier supports two channels (left & right), both 4-ohm stable, with two parallel output terminals per channel.
- Wiring Configuration Examples:
- 4 speakers total: 1 x 8-ohm speaker per terminal (final impedance = 4 ohms per channel).
- 2 speakers total: 1 x 4-ohm speaker wired to Output Ch. A Left, 1 x 4-ohm speaker wired to Output Ch. B Right.
- Never connect two 4-ohm speakers to the same output channel (e.g. Ch. A Left and Ch. A Right). This may damage the amplifier & speakers.
- Speaker Wiring:
- Use speaker wire to connect each speaker to the amplifier:
- Red wire → Positive terminal
- Black wire → Negative terminal
- Use speaker wire to connect each speaker to the amplifier:
4. Setting Up the Wireless Microphones (RPA70WBT V2 Only)
- Unscrew the end cap of each microphone.
- Insert batteries, then reattach the end cap.
- Turn on the microphones & raise the volume knob on the amplifier.
- The display on the microphone will show its channel & frequency.
- Use the middle switch setting on the microphone to mute or temporarily disable its sound.
- Extend the mic antennas on the back of the RPA70WBT for improved signal reception.
5. Using Wired Microphones
- Connect a microphone to the ¼-inch (6.35mm) Mic input on the front left corner of the unit.
- Adjust the Mic Volume knob to control microphone levels.
- Use the Mic Tone knob to adjust vocal clarity (increase for bass, decrease for treble).
- The Echo knob adds an echo effect for singing and karaoke setups.
6. Connecting External Audio Sources
- RCA Line Input: Connect DVD players, CD players, or music sources.
- ¼-inch Mic Inputs: For additional microphones.
- Optical/Coaxial Input: Connect gaming consoles, TVs, or computers.
- The TV's Digital Audio output should be set to Optical or Coaxial.
- The TV's Digital Audio format should be set to PCM Mode for compatibility.
7. Output Connections
- Record Output: Sends audio to a recording device.
- Preamp Output: Connects to an additional powered amp, subwoofer, or speaker.
- Dedicated Subwoofer Output: Provides extra low-end support.
- Adjust the Sub Out knob to control subwoofer output.
8. Equalizer & Sound Controls
- Bass & Treble Adjustments:
- Press Menu to access Bass & Treble settings.
- Adjust using the Master volume knob.
- Balance Control:
- Press Menu to access Left/Right speaker balance.
- Adjust output levels for each side.
- Preset EQ Settings (via Remote):
- Options include Pop, Rock, Classical, Jazz, etc.
9. Bluetooth Pairing
- Press the USB/BT and FM button to activate Bluetooth mode.
- On your smartphone or tablet, enable Bluetooth and search for the amp’s device name (RPA60BT or RPA70WBT).
- Tap to connect (a chime will confirm pairing).
10. Additional Music Playback Options
- Press the USB/BT and FM button to activate FM Tuner mode.
- FM Radio Tuner:
- Press the Play/Pause button to scan stations.
- Use the Previous/Next Track buttons to tune stations.
- AUX (3.5mm) Input: Connect laptops, tablets, or MP3 players.
- USB Input: Play music directly from a USB thumb drive.
Conclusion:
The Rockville RPA(BT) Series Bluetooth Amplifier / Receivers offer incredible flexibility for powering speakers, using microphones, and streaming audio from multiple sources. Whether for karaoke, home entertainment, or PA use, this guide ensures a smooth setup process.
Comments
0 comments
Please sign in to leave a comment.