RPG102K: How To Set Up & Use

Introduction

This guide will walk you through setting up and using your Rockville RPG102K Dual 10” Powered PA System. Whether you’re using it for live performances, karaoke, or events, this system provides powerful sound with versatile connectivity options.

What’s Included:

• (1) 10” Active Speaker (with built-in mixer)
• (1) 10” Passive Speaker
• (2) Speaker Stands
• (1) Power Cable
• (1) ¼” Speaker Cable (to connect the two speakers)
• (1) Microphone with XLR Cable
• (1) Mic Clip & Travel Pouch
• (1) Wireless Remote Control

Step-by-Step Setup

1. Mounting the Speakers on Stands

1. Assemble the Speaker Stands:
   • Loosen the bottom knob, spread the legs, and tighten the knob back.
   • Adjust the height by loosening the top knob, raising the pole, inserting the safety pin, and securing the knob.
2. Mount the Speakers:
   • Loosen the mounting knobs on the back of the speakers.
   • Align the pole socket on the bottom of each speaker with the stand and slide it on.
   • Tighten the knobs to secure the speakers.
   • If necessary, have another person assist you in mounting the speakers safely.

2. Connecting the Active and Passive Speakers

1. Use the included ¼” speaker cable to connect the two speakers:
   • Plug one end into the Speaker Out on the active speaker.
   • Plug the other end into the Speaker In on the passive speaker.
2. Power On the System:
   • Make sure the voltage selector on the back of the active speaker is set to 115V (for US use).
   • Plug the power cable into an outlet and turn on the active speaker.

3. Setting Up the Included Microphone

1. Plug the female end of the XLR cable into the microphone.
2. Plug the male end into the Mic Input on the active speaker.
   • The Mic Input is a combo jack, so you can also use a ¼” (6.35mm) cable if needed.
3. Turn up the Mic Level Knob and Main Volume Knob.
4. Turn on the microphone and test the sound.

Adjusting the Sound

• Treble Knob: Adjusts high frequencies (increase for crisp vocals).
• Bass Knob: Adjusts low frequencies (increase for deep sound).

4. Connecting a Bluetooth Device

The RPG102K supports wireless Bluetooth pairing for streaming music from a smartphone or tablet.

1. Enable Bluetooth Mode:
   • Press the Mode Button on the speaker until it enters Bluetooth Mode.
2. Pair Your Device:
   • Open Bluetooth settings on your device.
   • Search for “Rockville” and select it.
   • You’ll hear a confirmation sound when paired.
3. Adjust Volume:
   • Increase the MP3 Volume Knob and Main Volume Knob to hear playback.

Karaoke Tip: Use Bluetooth to play backing tracks from YouTube and sing along using the included microphone!

5. Other Ways to Play Music

• USB & SD Card Playback:
  • Insert a USB flash drive or SD card with music files.
  • Playback starts automatically.
  • Use the buttons under the display or the remote control to control playback.
• FM Radio Mode:
  • Switch to FM Mode using the Mode Button.
  • Tune into local radio stations.

6. Connecting External Audio Devices

The RPG102K has multiple input options for adding other audio sources:

Using the Line Input Section

1. Combo Jack (XLR or ¼”): Connect a mixer, keyboard, or another audio source.
2. RCA Input: Connect MP3 players, turntables, or external devices.

Example: Connecting a Mixer (RockMix 10FX)

1. Use an RCA to RCA cable.
2. Plug one end into the mixer’s RCA output.
3. Plug the other end into the RCA inputs on the active speaker.
4. Increase the Line Level Knob and Main Volume Knob to hear the mixer’s output.
5. Use the mixer’s built-in EQ and effects for more sound control.

7. Expanding Your Setup with Additional Speakers or a Subwoofer

You can connect the RPG102K to an external speaker or subwoofer using the Line Output Section.

Example: Connecting a Rockville RBG18S Subwoofer

1. Use an XLR cable.
2. Plug the female end into the XLR Line Output on the active speaker.
3. Plug the male end into the XLR input on the subwoofer.
4. Power on the subwoofer and adjust its volume level.

Troubleshooting & FAQs

Why is there no sound from the passive speaker?

• Ensure the ¼” speaker cable is properly connected between the Speaker Out (active) and Speaker In (passive).
• Check that the active speaker is turned on.
• Raise the Main Volume Knob.

Why is my Bluetooth not pairing?

• Make sure the speaker is in Bluetooth Mode.
• Check that your device’s Bluetooth is enabled.
• Try forgetting the device in Bluetooth settings and reconnecting.

Why is my microphone not working?

• Ensure the mic cable is securely connected.
• Raise the Mic Level and Volume Knobs.
• Test the mic with another device to confirm it’s working.

Can I connect an electric guitar or keyboard directly?

• Yes! Use the Line Input Combo Jack to connect instruments using a ¼” cable.

Can I use multiple microphones?

• Yes! You can connect multiple microphones using a mixer or by using both XLR and ¼” Mic Inputs.

Conclusion

The Rockville RPG102K Dual 10” Powered PA System is a versatile and easy-to-use speaker system that works great for live events, karaoke, and professional audio setups. With Bluetooth, multiple input options, and expandable configurations, you can customize the system to fit your needs.