RVSM1: How to Assemble

Introduction

The Rockville RVSM1 studio monitor stands are designed to provide a stable, adjustable, and vibration-resistant platform for your studio monitors. This guide will walk you through the quick and easy setup process, which takes under two minutes.

What’s Included in the Box

• Triangular base (bottom of the stand)
• Mini leveling legs (for surface balance)
• Center pole (adjustable height)
• Speaker plate (top platform for the monitors)
• Non-slip pads (to secure speakers in place)
• Mounting bolts, washers, and bracket
• Allen key (for assembly)

Step-by-Step Setup

Step 1: Assemble the Base

1. Take the triangular base and locate the three holes at the bottom.
2. Screw in the mini legs to provide stability on uneven surfaces.

Step 2: Attach the Center Pole

1. Insert a long bolt through the center hole of the base.
2. Place the bracket over the bolt to secure it.
3. Screw in the center pole tightly using the Allen key.

Step 3: Install the Speaker Plate

1. Remove the pre-installed bolt from the top of the center pole using the Allen key.
2. Place the speaker plate on top of the center pole.
3. Secure it with the washer and bolt, tightening it firmly with the Allen key.

Step 4: Apply the Non-Slip Pads

1. Peel off the adhesive backing on the non-slip pads.
2. Line them up on the speaker plate and press them firmly into place.

Step 5: Adjust the Height

1. Set the stand to your desired height by adjusting the center pole.
2. Insert the locking pin into place to secure the height.

Step 6: Repeat for the Second Stand

Follow the same steps for the second stand to complete the setup.

Features & Benefits

• Adjustable height for optimal speaker positioning.
• Non-slip pads keep your monitors secure and stable.
• Mini leveling legs ensure even balance on all surfaces.
• Sturdy steel construction provides maximum durability.

Conclusion

The Rockville RVSM1 Studio Monitor Stands are easy to assemble, stable, and adjustable, making them perfect for home studios, recording setups, and professional use. Follow these steps, and you’ll have them set up in minutes!