R1200L: How To Set Up & Use

Introduction

In this guide, we'll walk you through the setup process for the Rockville R1200L LED Fog Machine step by step. Whether you're a DJ, event organizer, or just setting up for a party, this tutorial will help you get your fog machine up and running quickly and efficiently.

What's Included:

• Rockville R1200L Fog Machine
• Wireless Remote
• Wired Remote
• Power Cable
• Mounting Bracket Handle

Step-by-Step Setup Instructions

1. Attaching the Mounting Bracket Handle

The mounting bracket handle allows you to either carry the unit or mount it to a truss system using a lighting clamp (such as the Rockville LC70).

How to Install:

1. Locate the two knob screws on the sides of the fog machine.
2. Align the holes of the bracket handle with the holes on the machine.
3. Insert a knob screw through one side and tighten by turning it to the right.
4. Repeat the process on the other side.

This bracket can also serve as an additional carrying handle.

2. Connecting the Power Cable

1. Locate the IEC power input on the back of the fog machine.
2. Plug the female end of the power cable into the IEC power input.
3. Plug the male end into a wall outlet.
4. Turn on the machine using the power switch. The LED indicator will illuminate to confirm power.

Important: The R1200L requires 3-5 minutes to heat up before it can start producing fog.

3. Adding Fog Fluid

1. Loosen the fog fluid tank cap on top of the machine.
2. Pour Rockville RFJG fog fluid into the tank.
3. Check the fog fluid level counter on the back of the machine to monitor fluid levels.
4. Secure the cap back in place and ensure the intake tube is fully submerged in fluid.

4. Connecting the Wired Remote

1. Locate the remote control input on the back of the unit.
2. Plug the wired remote connector into the input (aligning the pins correctly).
3. Once connected, the wired remote will power on.

5. Using the Wired Remote Controls

The wired remote has several controls for customizing the fog output:

Knobs:

• Yellow Knob (Interval Time) – Adjusts the time between fog bursts. Maximum setting = longest interval.
• Green Knob (Fog Duration) – Controls how long each burst lasts. Maximum setting = continuous fog output.
• Red Knob (Fog Thickness) – Adjusts fog density from thin (minimum setting) to thick (maximum setting).

Buttons:

• Yellow Button (Timer Mode) – Enables automatic fog bursts based on the Yellow and Green Knob settings.
• Red Button (Continuous Mode) – Keeps fog output active as long as possible within heating limits.
• Green Button (Manual Mode) – Allows for manual fog bursts when pressed.

6. Using the Wireless Remote

The wireless remote provides additional control, including LED effects.

Wireless Remote Buttons:

1. Button 1 – Selects a solid LED color (Red, Green, Blue, Amber, Purple, Teal, White, or OFF).
2. Button 2 – Sound-activated mode (LEDs respond to music and ambient sound).
3. Button 3 – Strobe mode (Flashes the current LED color rapidly).
4. Button 4 – Continuous fogging mode (Equivalent to the red button on the wired remote).

7. Adjusting Settings with the Back Panel Buttons

The control panel on the back of the machine offers even more customization:

• DMX Mode – Integrates the fog machine into a DMX lighting system.
• P Mode (Color Cycling Speed) – Adjusts LED color transitions (0-255 range).
• L Mode (Fade Speed) – Controls how smoothly colors fade in and out (0-255 range).
• E Mode – Adjusts LED color gradient effects.
• Sound Mode – Enables sound-activated LED effects (same as Button 2 on the wireless remote).
• F Mode (Strobe Speed) – Adjusts the speed of the LED strobe effect (0-255 range).

8. Using DMX Control

The Rockville R1200L is 7-channel DMX compatible, allowing integration with lighting controllers for precise operation. The DMX IN and OUT ports on the back enable connection to other DMX devices.

9. Mounting to a Truss System (Optional)

For DJ and event setups, the R1200L can be truss-mounted using a Rockville LC70 lighting clamp.

Mounting Steps:

1. Attach a lighting clamp to the mounting bracket.
2. Secure the unit to a truss system.
3. Use a safety cable through the safety loop for additional security.

Troubleshooting & FAQs

Why isn't my fog machine producing fog?

• Solution: Ensure the unit has had 3-5 minutes to heat up.
• Solution: Check the fog fluid level and refill if necessary.
• Solution: Make sure the intake tube is properly submerged in fluid.

Why are my LED lights not changing color?

• Solution: Verify the wireless remote has battery power.
• Solution: Check if the LED settings are correctly adjusted in P Mode or L Mode.

Can I control the fog machine with a DMX controller?

• Solution: Yes! The R1200L is DMX-compatible and works within a 7-channel DMX system.

Conclusion

Setting up your Rockville R1200L LED Fog Machine is straightforward, whether you're using the wired remote, wireless remote, or DMX integration. With customizable fog output and LED effects, it’s perfect for parties, DJs, concerts, and stage performances.