TITAN ARRAY SYSTEM: How To Set Up Karaoke

Introduction

The Rockville Titan Array System makes for a great karaoke setup by allowing you to connect both a microphone and a Bluetooth device. This guide will walk you through setting up your mic, Bluetooth device, and music playback so you can start singing along with lyrics displayed on your screen.

Step 1: Connecting a Microphone

1. Use an XLR cable:
   • Plug the female end into your microphone.
   • Plug the male end into the mic input on the back of the subwoofer.
2. Set the Input Mode:
   • Press the mode button next to the input to activate Microphone Mode.
3. Adjust the Mic Volume:
   • Turn up the Mic Volume knob on the back of the subwoofer.
4. Test the Mic:
   • Speak into the mic (Check 1-2), and your voice should come through the system.

Step 2: Connecting a Bluetooth Device

1. Set the Titan Array System to Bluetooth Mode:
   • Press the Mode button until the display shows "Bluetooth Unconnected."
2. Pair Your Smartphone or Tablet:
   • Open the Bluetooth settings on your device.
   • Search for "Titan Array System" and tap to pair.
   • The display will change to "Bluetooth Connected."
3. Raise the Line/MP3 Volume Knob:
   • Adjust this knob to ensure the music plays through the system.

Step 3: Playing Karaoke Music with Lyrics

1. Open the YouTube App (or a karaoke app) on your device.
2. Search for a Karaoke Version of a Song (e.g., "All Star Karaoke Version").
3. Play the Song and Sing Along:
   • Lyrics will be displayed on the screen.
   • Both the music and microphone audio will come through the Titan Array System.

Conclusion

Setting up karaoke with your Titan Array System is quick and easy. Whether you’re hosting a party or just singing for fun, this setup provides high-quality audio for vocals and music.