ROCKBOOTH XL: How To Set Up & Enhance with Lighting

Introduction

The Rockville Rock Booth XL DJ Facade is a portable, professional-looking DJ setup that provides a sleek and stylish appearance for your performances. It includes:

• A sturdy attachable table for DJ equipment
• Four foldable metal panels for easy transport
• White and black scrims for customizable aesthetics
• Cable management holes for a clean setup

This guide will walk you through assembling the Rock Booth XL, attaching the scrims, securing the table, and enhancing the facade with lighting.

Step 1: Unboxing and Identifying Components

Inside the Rock Booth XL carry bag, you’ll find:

1. Four metal foldable panels (facade)
2. Attachable table
3. Four locking knobs (stabilizers)
4. Two scrim color options (white and black)

Step 2: Attaching the Scrims

1. Lay Out the Facade Panels

• Unfold the four connected metal panels on the floor.
• Ensure that the Velcro strips are facing up.

2. Attach the Scrims

• Choose either white or black scrims based on your setup.
• Align the scrim’s Velcro edges with the Velcro strips on the facade.
• Stretch the scrim tightly to ensure a smooth, professional fit.
• Press down firmly to secure the Velcro.

Repeat this process for all four panels.

Step 3: Standing Up the Facade

• Lift the Rock Booth XL facade upright.
• Adjust the angle of the side panels to your preferred positioning.
• You can create a wider or more enclosed look depending on your setup.

At this point, you can use the facade as-is or proceed to install the attachable table.

Step 4: Attaching the Table

1. Positioning the Facade

• Ensure that the front two panels form a 90-degree angle with the side panels.

2. Placing the Table on the Facade

• The attachable table has four metal latches (two on the front, two on the sides).
• Align the table’s front latches with the metal bars on the front panels and hook them into place.
• Secure the side latches onto the side panel bars.

3. Locking the Table in Place

• The table includes four locking knobs to ensure stability.
• Locate the four designated holes on the table surface.
• Screw in the locking knobs for extra stability.
• Adjust as needed to ensure an even, secure surface.

Your facade and table are now fully assembled!

Step 5: Managing Cables for a Clean Setup

• Use the built-in cable management holes on the sides of the table to route power and audio cables neatly.
• This helps create a tidy, professional appearance for your DJ setup.

Step 6: Enhancing the Facade with Lighting (Optional)

If using the white scrims, you can illuminate the facade for a dynamic visual effect.

1. Positioning LED Par Lights

• Place 1-2 battery-powered Par lights per panel.
• Aim the lights upward toward the scrim.

2. Adjusting Light Settings

• Turn on the LED Par lights.
• Adjust the color and brightness using DMX controls or remote control.

This setup creates a stylish, illuminated effect perfect for parties and DJ performances!

Conclusion

The Rockville Rock Booth XL is easy to assemble, highly customizable, and provides a professional DJ setup. Whether using black scrims for a sleek look or white scrims with LED lighting for a vibrant setup, this facade enhances any performance.