ROCK SPOT 260W: How To Set Up Master / Slave Mode

Introduction

If you want to sync multiple Rock Spot 260W moving head lights without using a DMX controller, you can use the Master-Slave function. This setup allows one Master light to control all Slave lights, ensuring they follow the same movements and effects.

This guide will show you how to connect your lights using wired DMX cables or a wireless setup.

Step 1: Connecting Lights with DMX Cables

1. Take a DMX cable and plug the male end into the DMX OUT port of the first (Master) light.
2. Connect the other end into the DMX IN port of the next light in the chain.
3. Repeat this process for all additional lights in your setup.

Step 2: Configuring the Master Light

1. Navigate to the Mode Menu on the first light in the chain.
2. Scroll down to Master Choose and press Enter until it displays Master Mode.

Step 3: Configuring the Slave Lights

1. On each remaining light, go to the Mode Menu.
2. Set it to DMX Control Mode.
3. Scroll down to Master Choose and set it to either Slave Mode or Auto Mode.

Step 4: Testing the Master-Slave Connection

1. On the Master light, go to the Mode Menu.
2. Set it to Auto Run Mode.
3. The Slave lights should now automatically follow the movements and settings of the Master light.

Optional: Setting Up Master-Slave Mode Wirelessly

If your lights support wireless DMX, follow these steps:

1. Ensure all lights are powered on.
2. Set the Master light to Auto Run Mode.
3. Set all Slave lights to the same Wireless DMX code as the Master.
4. The Slave lights should now sync wirelessly.

Conclusion

With the Master-Slave function, you can easily synchronize multiple Rock Spot 260W moving head lights without needing a DMX controller. Whether using wired DMX cables or wireless DMX, this setup ensures all lights move and function in perfect sync for a professional lighting display.