BASS PARTY 65: How To Use Standby Mode

The Rockville Bass Party 65 features a standby mode that helps conserve battery power when the speaker is not in use. This guide will walk you through how to enter and exit standby mode, as well as how to fully power the speaker on and off.

Putting the Speaker into Standby Mode

1. Short press the power button on the top of the speaker.
2. You will hear an audio cue indicating that the speaker is powering off.
3. The LED screen will display "Standby".
4. The power button will glow red, confirming the speaker is in standby mode.

Note: Standby mode does not completely turn off the speaker—it simply reduces power consumption while keeping it ready for quick use.

Waking the Speaker from Standby Mode

• Short press the power button again.
• You will hear the speaker say "Power On".
• The speaker is now fully active and ready to use.

Turning the Speaker Off Completely

1. Press and hold the power button on the top of the speaker.
2. You will hear an audio cue saying "Power Off".
3. The power button light will turn off, indicating that the speaker is completely powered down.

Turning the Speaker Back On

• Press and hold the power button until the speaker powers on.
• The speaker will announce "Power On", and it will be ready to use.

Using the Remote to Wake the Speaker

• When in standby mode, you can use the remote control to wake the speaker.
• All functions of the speaker remain accessible via the remote, so you don’t need to manually press the power button.

Conclusion

Putting your Bass Party 65 into standby mode is a simple way to save battery power while keeping the speaker ready for quick use. You can wake it up with a short press of the power button or using the remote control. If you need to completely turn it off, just hold the power button down.