ROCK PARTY 6: How to Set Up & Use

Introduction

The Rockville Rock Party 6 is a portable, battery-powered party speaker with Bluetooth, LED lights, microphone inputs, and TWS (True Wireless Stereo) pairing. Whether you're using it for karaoke, parties, or outdoor events, this guide will walk you through charging, connecting, and optimizing your Rock Party 6.

What’s Included:

• Rock Party 6 Speaker
• Charging Cable
• Remote Control

Step-by-Step Setup Instructions

1. Charging the Rock Party 6

1. Locate the charging port next to the power button.
2. Plug one end of the charging cable into the charging port.
3. Plug the other end into a wall outlet.
4. A charging indicator light will illuminate.
5. Once fully charged, unplug and turn on the speaker using the power switch.

Battery Life: On a full charge, the Rock Party 6 provides up to 6 hours of playback.

2. Connecting Audio Sources

The Rock Party 6 has multiple input options:

• Bluetooth (Wireless streaming from a phone or tablet)
• Aux Input (3.5mm Line In)
• USB Drive (MP3 playback from a flash drive)
• SD Card Slot (TF Card playback)

Bluetooth Connection (Recommended)

1. Turn on the speaker.
2. Press the Mode button until you enter Bluetooth mode (or use the remote control).
3. On your phone or tablet, go to Bluetooth settings and look for "Rock Party 6".
4. Tap to pair. You’ll hear a confirmation chime when connected.

Note: You can use the Mode button on the speaker or remote to switch between input sources.

3. Controlling LED Party Lights

The Rock Party 6 has built-in LED lights that sync with the beat of the music.

• To change light modes:
  • Press the Light button on the top of the speaker.
  • Use the Light button on the remote control.
• The lights will flash and change patterns in sync with the music.

Tip: If you prefer a darker setting, you can turn off the lights using the remote.

4. Adjusting Sound Settings

The Rock Party 6 allows custom EQ tuning via the menu and remote control.

• Bass & Treble Control:
  • Use the Menu button and arrow buttons on the speaker or remote.
• EQ Presets:
  • Press the EQ button on the remote to switch between presets.

5. Using the Microphone Input for Karaoke

The Rock Party 6 includes two ¼” microphone inputs, perfect for karaoke.

How to Connect a Microphone

1. Plug a ¼” microphone cable into either Mic Input 1 or Mic Input 2.
2. Speak into the mic—the sound will come through the speaker.
3. Adjust settings with the remote:
   • Mic Volume (+/-)
   • Echo Effect (+/-) (adds a reverb effect to vocals)

Pro Tip: To create a DIY karaoke setup, connect the Rock Party 6 via Bluetooth to a tablet or phone, then play karaoke tracks on YouTube.

6. Connecting Two Rock Party 6 Speakers via TWS

The True Wireless Stereo (TWS) feature allows you to wirelessly pair two Rock Party 6 speakers for bigger sound and true stereo separation.

How to Use TWS:

1. Connect your phone to one Rock Party 6 via Bluetooth.
2. Turn on the second Rock Party 6.
3. On the second speaker, press and hold the TWS button for 3 seconds.
4. The display will show "Slave Mode", indicating the speakers are linked.
5. Both speakers will now play the same audio wirelessly.

Note: Only Bluetooth audio is transmitted over TWS. Microphone inputs remain independent on each speaker.

Troubleshooting & FAQs

Q: My Rock Party 6 won’t turn on. What should I check?

• Ensure the battery is charged or try using it while plugged in.
• Check the power switch and make sure it’s in the ON position.

Q: The Bluetooth isn’t connecting. How do I fix it?

• Ensure the speaker is in Bluetooth mode.
• Check that your device’s Bluetooth is enabled and within range.
• If the speaker is paired with another device, disconnect the other device first.

Q: How do I turn off the LED lights?

• Use the remote control or press the Light button on top of the unit.

Q: Can I use the Rock Party 6 while charging?

• Yes! The speaker can play while plugged in for continuous use.

Q: What is the best way to get a louder, richer sound?

• Pair two Rock Party 6 speakers via TWS for bigger stereo sound.
• Adjust EQ settings (Bass & Treble) for deeper bass and clearer vocals.

Conclusion

The Rockville Rock Party 6 is a versatile and powerful portable speaker with Bluetooth, LED lights, microphone inputs, and TWS pairing. Whether you're using it for parties, karaoke, or just enjoying music, this guide ensures you get the most out of your setup.