ROCKBOOTH: How To Set Up & Enhance with Lighting

Introduction

The Rockville Rock Booth DJ Façade is a sleek and portable setup designed for DJs looking to create a professional and clean workstation. This guide will walk you through assembling the façade, attaching the mountable table, and enhancing the setup with lighting effects.

What’s Included:

• Rock Booth DJ Façade (4-panel frame)
• Mountable Table
• Black and White Scrims
• Gig Bag Travel Case
• Four Locking Knobs
• Built-in Cable Management Holes

Step-by-Step Setup Instructions

1. Unpacking and Organizing

1. Open the gig bag and remove all components.
2. Decide whether you want to use the black scrims (for a sleek, dark look) or the white scrims (which allow for lighting effects).
3. Lay out all pieces for easy access.

2. Attaching the Scrims

1. Unfold the DJ façade into a four-panel shape.
2. Lay the façade flat on the floor with the Velcro strips facing upward.
3. Take one of the scrims and align the Velcro edge with the facade’s Velcro strips.
4. Stretch the scrim tightly to avoid wrinkles, securing it onto the Velcro.
5. Repeat this process for all four panels.

Tip: Smooth out the scrims with your fingers for a clean and professional look.

3. Assembling the DJ Façade

1. Once all scrims are attached, stand the façade upright.
2. You can use the façade as is or attach the mountable table for additional workspace.

4. Attaching the Mountable Table

1. Fold the side panels inward to form right angles.
2. Position the table mount so that the two front latches face outward.
3. Hook the front latches onto the facade’s front edge.
4. Secure the side latches by aligning them with the metal side panels.
5. Insert the four locking knobs at each connection point and tighten them to ensure the table remains stable.

Why it’s important: Unlike other DJ facades, the Rock Booth includes locking knobs to prevent the table from shifting while holding your expensive DJ gear.

5. Managing Cables

• The table mount has built-in cable management holes at both ends.
• Route power cables and audio connections through these openings for a clean and professional setup.

Enhancing Your Setup with Lighting

For a visually striking DJ booth, you can use battery-powered PAR lights behind the façade.

Lighting Setup:

1. Position four PAR lights (such as the Battery Par 50) behind the façade.
2. Place each light near the base of a panel, ensuring it does not touch the scrim.
3. Turn on the lights and set them to your preferred color.
4. If your PAR lights include a remote control, you can change colors on the fly for added effect.

Pro Tip: Use white scrims for maximum light diffusion and vibrant effects.

Troubleshooting & FAQs

Q: Can I use both scrim colors?

• Yes! Black scrims create a professional, concealed look, while white scrims are perfect for lighting effects.

Q: How do I keep the scrims wrinkle-free?

• Stretch them tightly before securing them onto the Velcro. Smooth out any wrinkles using your fingers.

Q: How much weight can the mountable table hold?

• The table is built to hold standard DJ controllers, mixers, and laptops securely. Always use the locking knobs for added stability.

Q: How do I transport the Rock Booth easily?

• The included gig bag makes it easy to carry everything to gigs.

Conclusion

Setting up the Rockville Rock Booth DJ Façade with Mountable Table is quick and simple. Whether you're using it for a mobile DJ setup, club performances, or special events, it provides a clean, professional look with customizable scrims and lighting options. Follow these steps, and you’ll have a sturdy, stylish DJ booth ready to impress your audience!