ELITE PARTY 65: How To Set Up & Use

Introduction

The Elite Party 65 is a powerful speaker with numerous features that make it perfect for live performances, karaoke, music playback, and more. This guide will walk you through all the essential steps and controls to get the most out of your speaker.

Step-by-Step Guide

1. Powering On and Switching Modes

• Power On: To turn on your speaker, long press the power button.
• Switching Modes: Once the speaker is on, you can short press the power button to toggle between different source modes (Bluetooth, USB, AUX, Optical, etc.).

2. LED Control

• Turn on LEDs: Press the LED button to activate the built-in LEDs, which interact with the music.
• Switch Between LED Modes: Press the LED button to switch between different modes. There are three modes in total. Press again to turn off the LEDs.

3. Music Playback Controls

• Play/Pause: Use the play/pause button to pause or resume the music. You can long press the button to disconnect the current Bluetooth device and let someone else connect.
• Skip Forward/Previous: Use the skip forward button to jump to the next track, or the previous button to return to the previous track. While in USB mode, holding these buttons down will let you navigate between folders on your USB drive.

4. Volume and Sound Adjustments

• Volume Control: Use the middle volume knob to adjust the overall sound output of the speaker.
• Treble and Bass Adjustments: The treble and bass knobs allow you to adjust the high and low frequencies for customized sound.

5. Inputs and Connections

• 1/4-inch Inputs: The first input is for connecting a microphone or guitar, and the second input can be used for another microphone or line-level instrument like a keyboard.
• AUX Input: Use the AUX input to connect MP3 players or phones using the included AUX cable.
• USB Input: Plug in a USB thumb drive to play music directly from the device.
• Optical Input: Use the optical input to connect your TV or projector to the speaker for sound.

6. Microphone Settings

• Mic Volume: Adjust the volume of your microphone using the mic volume knob.
• Mic Echo: The mic echo knob adds an echo effect to your voice. Adjust the level of echo to your preference.

7. Pitch Correction and Autotune

• Key Button: Use the key button to set the correct key for your voice. There are 10 different keys to choose from.
• Pitch Snap: The pitch snap button helps correct your voice to the proper note. You can choose between:
  • Near: This will pitch your voice to the nearest note in the key.
  • Upper: This raises your voice if you're singing flat.
• Pitch Accuracy: The pitch accuracy button sets how fast your voice reaches the correct pitch. Choose normal for a smooth transition or better for a quicker correction.
• Turning Off Pitch Correction: Set both the pitch snap and pitch accuracy buttons to off for no pitch correction.
• Pitch Shift: Use the pitch plus and pitch minus buttons to manually adjust the pitch of your voice to a higher or lower range.

8. Using the Elite Party 65 for Live Performances

• You can connect two microphones or two instruments for a live performance setup.
  • Use the first 1/4-inch input for a microphone or guitar, and the second for another microphone or keyboard.
  • Adjust the volume using the mic volume knob and use the guitar’s volume knobs for additional control over the mix of guitar and microphone sound.

9. Automatic Power-Off

• The speaker will automatically turn off after a period of inactivity to save battery life.

Conclusion

The Elite Party 65 is packed with features that make it ideal for any performance or party setting. Whether you're singing karaoke, playing music, or giving a live performance, this speaker has all the tools you need. From sound adjustments to pitch correction, you're in control of your audio experience.