R700: How To Set Up Fog / Smoke Machine

Introduction

The Rockville R700 Fog Machine is the perfect device for creating an atmosphere for live performances, video shoots, parties, and much more. This easy-to-use fog machine comes with a wired and wireless remote, making it convenient to control from anywhere. In this guide, we will walk you through the setup process step by step.

Requirements

• Rockville R700 Fog Machine
• 17 ounces of fog fluid (included)
• Wired remote control (included)
• Wireless remote control (included)
• Attach handle (included)
• Power cord
• Phillips screwdriver

Step-by-Step Instructions

1. Attach the Handle

• Take the handle, washer, and screw-on knob included in the package.
• Sandwich the handle with the washer piece on the inside and screw the knob through the other side of the handle.
• Line up the threaded piece with one of the holes on the side of the fog machine and screw it in to secure the handle in place.
• Repeat the same process on the other side of the handle.
• The handle allows you to easily move the fog machine or mount it to a truss rod.

2. Set Up the Fog Machine

• You can place the fog machine either on the rubber feet on the bottom (for floor or table use) or mount it to a truss rod using the handle.

3. Connect the Power and Remote

• Plug the power cord into the back of the fog machine.
• Attach the wired remote by plugging it into the manual controller input on the back of the machine. The wired remote is magnetized, so you can easily stick it to the machine for convenience.

4. Add Fog Fluid

• Unscrew the top cap of the fog machine to access the fluid tank.
• Remove the lid for the fluid reservoir, and carefully pour the fog fluid into the tank.
• Close the fog machine by placing the gasket in first and securely tightening the cap.

5. Check Fluid Levels

• The fluid indicator on the fog machine shows the remaining fluid, so you’ll always know when it’s time to refill.

6. Power On the Fog Machine

• Turn on the power to the fog machine.
• Allow the machine to heat up for about 3 to 4 minutes before use.

7. Use the Wired Remote

• Hold down the button on the wired controller to continuously disperse fog.
• The machine will stop releasing fog as soon as you release the button.
• The red light on the remote will flash to indicate the machine is ready to use.

8. Use the Wireless Remote

• The wireless remote can be used for more flexibility:
  • Press the unlock button to release a 30-second stream of fog.
  • After 30 seconds, the machine will stop and reset automatically, and you can press the unlock button again for the next round of fog.
  • If you want to stop the fog earlier, simply press the lock button to stop the fog immediately.

9. Test the Machine

• Press the unlock button on the wireless remote to release fog.
• To stop it early, press the lock button to end the fog output.

Conclusion

The Rockville R700 Fog Machine is an excellent tool for adding ambiance to any event, and it’s simple to set up and use. With the included wired and wireless remote options, you can easily control the fog output at the push of a button.