AIR-BENCH: How To Set Up & Adjust

Introduction

The Rockville Air Bench is a comfortable and adjustable piano and keyboard bench featuring an air-lift height adjustment system. This guide will walk you through the assembly process step by step.

What’s Included

• Seat cushion
• Middle air-lift mechanism
• H-style base
• Two Allen keys (for assembly)
• Eight screws with washers (pre-installed in the parts)

Step-by-Step Assembly

1. Removing Screws from the Air-Lift Piece

1. Locate the four screws and washers at the bottom of the air-lift mechanism.
2. Use the larger Allen key to unscrew and remove all four screws and washers.

2. Attaching the Base to the Air-Lift Mechanism

1. Take the H-style base and line up the four holes with the holes on the air-lift mechanism.
2. Ensure the rubber feet are facing upward before attaching the screws.
3. Insert each screw with a washer into the aligned holes.
4. Using the larger Allen key, tighten all screws to secure the base to the air-lift mechanism.

3. Attaching the Seat to the Bench

1. Use the smaller Allen key to remove the four screws and washers from the bottom of the seat.
2. Align the four holes on the seat with the holes on the top of the air-lift mechanism.
3. Insert each screw and washer into the aligned holes.
4. Use the smaller Allen key to tighten all screws securely.

4. Adjusting the Bench Height

1. Flip the assembled bench upright.
2. Place it in front of your piano or keyboard.
3. Use the air-lift handle on the side to raise or lower the seat to your preferred height.

Conclusion

Setting up the Rockville Air Bench is quick and simple, requiring only eight screws and the included Allen keys. With its adjustable height, sturdy design, and comfortable seating, it’s a great addition to any musician’s setup.