RPG122K: How To Set Up & Use

Introduction

The Rockville RPG122K is a complete PA system designed for band rehearsals, live performances, houses of worship, conferences, parties, karaoke, and more. This guide will walk you through setting up your speakers, microphone, Bluetooth, and additional audio connections.

Step 1: Unboxing and Identifying Components

Inside the RPG122K package, you’ll find:

1. Two speaker stands
2. Two speakers (one active and one passive)
3. 19-foot quarter-inch speaker cable (to connect the two speakers)
4. Dynamic microphone (with built-in on/off switch)
5. XLR cable (for the microphone)
6. Power cable (for the active speaker)
7. Travel pouch
8. Microphone clip
9. Wireless remote control (for the Bluetooth module)

Step 2: Setting Up the Speaker Stands

1. Expand the tripod legs:
   • Loosen the bottom knob and spread out the legs.
   • Tighten the knob to secure them in place.
2. Adjust the vertical height:
   • Loosen the top knob and raise the pole to your desired height.
   • Use the locking pin to secure the stand at the selected height.
   • Tighten the top knob for extra stability.
3. Mount the speakers:
   • Each speaker has a 35mm socket on the bottom.
   • Align the speaker with the stand and slide it into place.
   • Tighten the locking knob on the speaker to secure it.

Repeat for the second speaker stand.

Step 3: Connecting the Active and Passive Speakers

1. Locate the active speaker (this powers the passive speaker).
2. Plug the power cable into the active speaker and connect it to a power outlet.
3. Connect the passive speaker using the included 19-foot quarter-inch cable:
   • Plug one end into the "Speaker Out" jack on the active speaker.
   • Plug the other end into the "Speaker In" jack on the passive speaker.

Your speakers are now physically connected!

Step 4: Setting Up the Microphone

1. Connect the XLR cable:
   • Plug the female end into the microphone.
   • Plug the male end into Channel 1 or 2 on the active speaker.
2. Adjust the microphone volume:
   • Lower the volume knobs before turning on the system.
   • Slowly raise the volume on Channel 1 and adjust the master volume.
3. Turn on the microphone:
   • Flip the on/off switch and speak into the mic to test.

Step 5: Using the Built-in Bluetooth Module

Pairing Your Device

1. Press the "Mode" button on the speaker to enter Bluetooth pairing mode.
2. Go to your phone or tablet’s Bluetooth settings.
3. Find and select "Rockville" in the list of available devices.
4. Once connected, the LCD display will show "Bluetooth Connected".

Playing Music

• Use the MP3 volume knob to adjust Bluetooth audio levels.
• The 2-band EQ (bass/treble knobs) can fine-tune the sound.
• Use the included remote control to change tracks, adjust volume, and switch modes.

Step 6: Additional Audio Input Options

RCA and AUX Inputs

• The RPG122K includes RCA inputs and a 3.5mm AUX input for wired music sources.
• Make sure the "MP3/Line" button is pressed in for RCA input mode.

Gain Staging for Best Sound

• Adjust volume levels properly to avoid distortion:
  1. Set your phone or music source volume to about 75%.
  2. Raise the MP3 volume knob on the speaker.
  3. Adjust the master volume for overall loudness.
  4. Watch the LED clip indicator—if it turns red, reduce volume to avoid distortion.

Step 7: Expanding Your Sound System

The RPG122K includes RCA line outputs, allowing you to connect:

• A powered subwoofer
• Additional powered speakers
• A mixer for a larger setup

Connecting to a Mixer

1. Use an RCA cable to connect the "Line Out" RCA jacks on the RPG122K to the mixer’s RCA inputs.
2. Adjust the mixer levels to blend your microphones and music sources.
3. Play music or test the microphone—both should now play through all connected speakers.

Step 8: Karaoke Setup

• Connect your phone/tablet via Bluetooth.
• Search for karaoke tracks on YouTube.
• Sing into the microphone while the instrumental plays through the speakers.

This setup works great for parties, events, and live performances!

Conclusion

The Rockville RPG122K PA System is a powerful, all-in-one sound solution that is easy to set up and expand. Whether you're using it for live events, karaoke, or DJing, this system offers versatile connectivity, strong audio output, and user-friendly controls.