RPM85: How To Set Up & Use

Introduction

The Rockville RPM85 is a versatile powered mixer designed for live performances, band rehearsals, conferences, houses of worship, karaoke, and music playback at parties. This guide will walk you through setting up and using your RPM85 step by step, making it easy for beginners and professionals alike.

What's Included

• Rockville RPM85 Powered Mixer
• IEC Power Cable
• Wireless Remote Control

The mixer also features a built-in handle for easy transport to gigs and events.

Step-by-Step Setup Guide

1. Connecting Power

1. Take the female end of the included IEC power cable and plug it into the power socket on the back of the mixer.
2. Plug the male end into a power outlet.
3. Flip the power switch to turn the mixer on.

2. Connecting Passive Speakers

The RPM85 has two main ¼-inch speaker outputs (A and B) for passive speakers.

1. Get two ¼-inch speaker cables.
2. Plug one end of each cable into the A and B speaker outputs on the back of the mixer.
3. Connect the other end of each cable into the ¼-inch input on your passive speakers.

Additional Outputs:

• ¼-inch Line Output: Send audio signal to an additional speaker.
• Effect Return: Connect an external effects processor.
• RCA Outputs: Send audio to a recording device or other RCA-compatible equipment.

3. Connecting a Microphone

The RPM85 features eight mono XLR inputs for microphones.

1. Turn the channel level knob all the way down to avoid feedback.
2. Take an XLR cable and connect the female end to your microphone.
3. Plug the male end of the XLR cable into channel 1’s XLR input (or any available channel).
4. Raise the volume knob for the channel.
5. Ensure the main volume knob is turned up.
6. Turn on the microphone and test audio through the speakers.

Using a Condenser Microphone?

• Press the Phantom Power button to supply power to the mic.

4. Connecting a Guitar or Bass

1. Use a ¼-inch instrument cable.
2. Plug one end into your guitar or bass.
3. Insert the other end into the ¼-inch Line In input of your selected channel.
4. Adjust the volume as needed.

Mixer Controls and Features

Channel Controls

Each channel includes:

• 2-Band EQ:
  • Treble Knob: Enhances high frequencies for clarity.
  • Bass Knob: Increases low frequencies for deeper tones.
• Reverb Knob: Adds echo effects to vocals or instruments.
  • Ensure the EFX Controller volume knob is turned up to hear the effect.

Master Section

• 5-Band EQ: Adjusts the overall sound mix.
• Master Volume Knob: Controls the overall output level.

Playing Music Through the Mixer

1. RCA Inputs (CD Player, Tape Machine, AUX Cable)

1. Connect your device using RCA cables to the RCA inputs on the back.
2. Press the Mode button on the front panel to select the correct source.
3. Raise the AUX volume knob to hear the device.

2. Bluetooth Streaming

1. Open Bluetooth settings on your phone or tablet.
2. Look for RPM85 in the device list (may appear as “Bluetooth”).
3. Select it to pair. The LED display will confirm “Connected”.
4. Raise the MP3 volume knob to hear the music.

3. USB Drive or SD Card Playback

• Insert a USB flash drive or SD card into the appropriate slot.
• Use the MP3 volume knob to adjust playback volume.

Using the Wireless Remote

The included wireless remote control allows you to:

• Adjust EQ settings
• Control volume
• Pause/play, fast-forward, and rewind tracks
• Switch between different playback modes

Conclusion

The Rockville RPM85 powered mixer is packed with features that make it easy to use for any event. Whether you're performing live, hosting a karaoke night, or playing music at a party, this guide ensures you're set up for success.