RTP-GO: How To Set Up Portable Collapsible Totem Stands

Introduction

The Rockville RTP-GO is a portable, collapsible totem stand designed for speakers, moving head lights, and other DJ or stage equipment. Available in black and white, the setup process is identical for both. This guide will walk you through the assembly, height adjustments, cable management, and adding a scrim for a professional illuminated look.

What’s Included?

• Two bottom base plates
• One top plate
• Two beams (vertical supports)
• Four braces
• Eight hand-tightening knobs
• Attachable 35mm pole mount (for mounting speakers)
• Two scrims (black and white)
• Two foam pads
• Velcro strips (for cable management)
• Carrying bag with straps and storage pocket
• Allen key and wrench (for tightening bolts and nuts if needed)

Step 1: Assembling the Base

1. Remove the rubber padding from the bolts on the base plates.
2. Place the two bottom plates side by side.
3. Take the two beams and line up their holes with the bolts on the bottom plates horizontally.
4. Attach two braces to the bolts on the bottom of the beams.
5. Secure the braces using four hand-tightening knobs.

Step 2: Adjusting the Height

The RTP-GO stand features quick-release pins for easy height adjustments.

1. Pull the quick-release pin, twist, and release it.
2. Extend or lower the beams to your preferred height.
3. When you hear a click, the stand is securely locked in place.

Step 3: Attaching the Top Plate

1. Place the top plate on top of the beams, aligning the holes.
2. If the bolts don’t fit easily, use the Allen key and wrench to slightly loosen them.
3. Secure the top plate with two braces using four hand-tightening knobs.

Step 4: Adding Foam Pads (Optional)

To protect your speakers or lighting equipment:

1. Peel off the adhesive backing from the foam pads.
2. Align the pads with the top plate’s surface.
3. Press firmly to secure them in place.

Step 5: Mounting a Speaker (Optional)

If you want to mount a speaker:

1. Take the attachable 35mm pole mount and remove the bolt.
2. Align the pole mount hole with the hole on the top plate.
3. Secure it using the screw knob.
4. Place any 35mm speaker onto the totem stand.

For moving head or effect lights, you don’t need to attach the pole mount—simply place your light fixture on top.

Step 6: Extending the Stand’s Height (Optional)

1. Pull, twist, and release the quick-release pins on the beams.
2. Extend the stand higher if needed.
3. Once you hear a click, the stand is locked in place.

Step 7: Managing Cables

1. Use the opening in the top plate to run cables through the stand.
2. Secure cables to the stand using the included Velcro strips for a clean look.

Step 8: Attaching a Scrim for a Professional Look

1. Slide a black or white scrim over the entire stand from the top down.
2. If using a white scrim, place a PAR light at the base for an illuminated effect:
   • Lift the bottom of the scrim.
   • Position a PAR light on the floor inside the stand.
   • Pull the scrim back down to cover the light.

This creates a glowing effect, perfect for DJ setups, weddings, or stage performances.

Conclusion

The Rockville RTP-GO is easy to assemble and transport, making it perfect for DJs, event professionals, and stage setups. Whether you’re mounting a speaker, placing a light fixture, or using a scrim for a professional aesthetic, this stand provides stability, height adjustability, and versatility.