RXS20: How To Set Up & Use

Introduction

The Rockville RXS20 Portable Mixer Stand is a sturdy and adjustable stand designed to hold mixers for live performances, recording setups, DJ events, and more. This guide will walk you through the assembly, height and width adjustments, and proper placement of your mixer.

What’s Included

• Two outside legs (left and right)
• Two adjustable crossbars
• Locking pins for height adjustment
• Knobs for width adjustment

Step-by-Step Assembly Guide

1. Adjusting the Crossbars

1. Take one crossbar and loosen the knobs in the middle.
2. Extend the arms outward to match the width of your mixer.
3. Tighten the knobs once you reach the correct width.
4. Repeat these steps for the second crossbar.

2. Adjusting the Height of the Stand

1. Locate the locking pins on each leg of the stand.
2. Pull out the pin and twist it to the middle position so it stays in place.
3. Use both hands to lift the top section of the stand to your desired height.
4. Align the holes on the legs with the locking pin.
5. Pull the pin back out and twist it back to its original position to lock the height.
6. Ensure the pin clicks into place, securing the legs at the chosen height.

3. Attaching the Crossbars to the Legs

1. Loosen the knobs at both ends of the crossbars.
2. Take one crossbar and slide it into the slots on the legs.
   • Ensure the slots on the legs are outside of the bar.
   • Ensure the washers are outside of the slots.
3. Tighten the knobs at both ends to lock the bar in place.
4. Repeat the process for the second crossbar at the bottom slots.
5. Tighten the knobs to fully secure the stand.

4. Adjusting the Stand for Your Mixer

• Width Adjustment
  • Loosen the knobs in the middle of the crossbars.
  • Extend or retract the bars to match the width of your mixer.
  • Tighten the knobs to lock the width in place.
• Height Adjustment
  • Use the locking pins on the legs to adjust the stand's height.
  • Ensure the pins click into place for stability.

5. Placing the Mixer on the Stand

1. Ensure the stand is fully assembled and secure.
2. Carefully place your mixer on top of the stand.
3. Adjust the width and height if needed for optimal positioning.

Conclusion

The Rockville RXS20 Portable Mixer Stand is easy to assemble and fully adjustable for different mixer sizes and user preferences. Whether you need it for a live performance, recording session, or DJ event, this stand provides stability, customization, and durability.

By following these steps, you can:

• Assemble the stand securely.
• Adjust the height and width to fit your mixer.
• Ensure a stable and professional setup.

Enjoy your Rockville RXS20 Portable Mixer Stand, and take your live or studio setup to the next level!