XBAR-24: How To Set Up & Use

Introduction

In this guide, we’ll walk you through the installation and wiring process for the Rockville X-Bar 24 Sound Bar on your UTV. This sound bar features a built-in Bluetooth receiver, control buttons, AUX input, and RCA outputs—making it an excellent audio solution for off-road adventures.

By following these simple steps, you’ll have your X-Bar 24 securely mounted and powered in no time!

Step 1: Unboxing and Preparing for Installation

Before you begin, lay out all the included parts to ensure you have everything needed for installation. Your Rockville X-Bar 24 Sound Bar package includes:

• X-Bar 24 Sound Bar
• Clamp bases (2)
• Clamp rings (4)
• Rubber strips
• Allen screws (various sizes)
• Allen key
• Washers & nuts
• Zip ties (for securing wires)

Attaching the Clamp Bases

1. Take a clamp base and align it with the mounting holes on one side of the sound bar.
2. Use a small Allen screw and the included Allen key to secure it.
3. Repeat the process for the other clamp base on the opposite side.

Step 2: Mounting the Sound Bar on Your UTV

Now that the clamp bases are attached, it’s time to mount the sound bar to your UTV’s roll bar.

Choosing a Mounting Location

The X-Bar 24 can be mounted:

• In front of the driver and passenger seats (recommended for easy access to controls).
• On the rear roll bars behind the seats.

Installing the Clamps

1. Prepare the Clamp Rings
   • Insert rubber strips inside the clamp rings.
   • Add additional rubber strips if needed for a tighter fit.
2. Position the Clamps on the Roll Bar
   • Place two clamp rings on one side of the roll bar.
   • Place two more clamp rings on the opposite side.
3. Attaching the Sound Bar
   • Line up the holes on the clamp bases with the clamp rings.
   • Run a long Allen screw with a washer through both the clamp ring and clamp base.
   • Repeat for the other side.
4. Securing the Sound Bar
   • Place a nut on the back of each Allen screw.
   • Use your hand to hold the nut while tightening the screw.
   • For extra security, use a wrench or pliers to firmly tighten the bolts.

Step 3: Wiring the Sound Bar

The wiring process is straightforward and consists of connecting the power and ground wires to your UTV’s battery.

Connecting the Power and Ground Wires

1. Prepare the Wires
   • Strip back a small section of the red power wire and black ground wire.
   • Crimp O-ring connectors onto the ends for a secure battery connection.
2. Route the Wiring Safely
   • Identify a clear path to run the wires from the sound bar to the battery.
   • Secure the wires along the roll bar using the included zip ties.
   • Ensure no loose wires can interfere with moving parts.
3. Connect to the UTV Battery
   • Attach the red power wire to the positive terminal on the battery.
   • Attach the black ground wire to the negative terminal on the battery.

Power Management Options

• Direct to Battery (Standard Setup)
  • The sound bar will work even when the UTV is off.
  • Turn off the sound bar when not in use to avoid draining the battery.
  • If storing the UTV for extended periods, remove the fuse from the power wire.
• Wiring to Ignition (Optional)
  • Allows the sound bar to turn on/off with the UTV’s key.
  • Connect the power wire to an ignition-switched power source instead of the battery.

Step 4: Connecting Audio Sources

The Rockville X-Bar 24 offers multiple ways to play music:

Bluetooth Connection

1. Turn on the sound bar.
2. Press the Bluetooth button to enter pairing mode.
3. Open your device’s Bluetooth settings and select "X-Bar 24".
4. Once paired, play music wirelessly from your smartphone or tablet.

AUX Input

• Use a 3.5mm AUX cable to connect your phone, tablet, or MP3 player.

RCA Outputs (For Expanding Your Audio System)

• If using an external amplifier or head unit, connect RCA cables from the RCA outputs on the sound bar to your amp or head unit.

Conclusion

Your Rockville X-Bar 24 Sound Bar is now securely mounted and wired to your UTV! With Bluetooth, AUX, and RCA connections, you’re ready to enjoy high-quality sound on your rides.