ONE-BAR: How To Set Up All In One 2.1 Sound Bar w/ Sub Built In + Bluetooth

Introduction

The Rockville One Bar Soundbar is a versatile home theater audio solution that enhances TV, music, and gaming audio. This guide will walk you through the complete setup process, including connecting power, pairing Bluetooth, integrating with your TV, and mounting it on the wall.

By following these steps, you’ll have your One Bar Soundbar fully installed and optimized for the best listening experience.

Step 1: Powering On the Soundbar

1. Plug the power cable into the wall outlet.
2. Locate the control buttons on the soundbar, including:
   • Power On/Off
   • Volume Up/Down
   • Source Select (Input Mode)
3. You can also use the included remote control for full functionality.

Step 2: Using the Remote Control

The remote control provides easy access to various settings:

• Power Button – Turns the soundbar on/off.
• Mute Button – Instantly mutes audio.
• Input Select – Switch between Bluetooth, Optical, HDMI, and AUX.
• Bass & Treble Adjustments – Customize bass and treble levels (-5 to +5).
• EQ Presets – Select from four preset modes:
  • E1 (Music Mode) – Optimized for music playback.
  • E2 (Movie Mode) – Enhanced for watching movies.
  • E3 (News Mode) – Focuses on clear dialogue.
  • E4 (3D Mode) – Surround sound effect for immersive audio.

Step 3: Connecting Bluetooth Devices

1. Press the Input Select button until BT (Bluetooth) mode is displayed.
2. Open Bluetooth settings on your phone, tablet, or computer.
3. Search for "One Bar" and select it to pair.
4. A chime sound will confirm a successful connection.
5. Start playing music or video to test audio output.

Step 4: Connecting the Soundbar to Your TV

There are multiple ways to connect your One Bar Soundbar to your TV, depending on your TV’s available outputs.

Option 1: HDMI ARC (Best Quality)

If your TV supports HDMI ARC (Audio Return Channel):

1. Connect an HDMI cable from your TV’s HDMI ARC port to the HDMI input on the soundbar.
2. On your TV, go to Settings > Audio Output > Select HDMI ARC.
3. Use the TV remote to control the volume of the soundbar.

Troubleshooting:

• If the TV does not specify HDMI ARC, it may not support audio output via HDMI.
• If no sound is coming through, ensure ARC is enabled in the TV's settings.

Option 2: Optical Cable (Digital Audio)

If your TV has an optical output:

1. Connect an optical cable from the TV’s Optical Out port to the Optical Input on the soundbar.
2. Change the TV audio settings to Optical Output.

Option 3: RCA to AUX Cable (For Older TVs)

1. Connect the RCA to 3.5mm AUX cable from the TV’s RCA outputs to the AUX input on the soundbar.
2. Select AUX mode on the soundbar using the Input button.

Step 5: Mounting the Soundbar on the Wall

The One Bar Soundbar can be mounted for a clean and professional look. The package includes:

• Two mounting brackets
• Four screws
• Four wall anchors

Installation Steps:

1. Determine the mounting location. Mark the wall where the soundbar will be installed.
2. Drill holes for the wall anchors.
3. Insert the wall anchors until they are flush with the wall.
4. Align the mounting brackets with the anchors and mark screw placements.
5. Screw the brackets into place securely.
6. Place the soundbar onto the mounts.

For a clean installation, you can hide cables inside the wall using cable management solutions.

Troubleshooting & FAQs

1. No sound is coming from the soundbar.

• Ensure the correct input source is selected (HDMI ARC, Optical, AUX, Bluetooth).
• Verify TV audio settings are set to external speakers.
• Check the volume level on both the TV and soundbar.

2. The HDMI ARC connection is not working.

• Confirm that the TV supports HDMI ARC (not all HDMI ports support audio output).
• Enable ARC mode in the TV’s audio settings.
• Try using a different HDMI cable.

3. Bluetooth is not connecting.

• Make sure Bluetooth mode is activated on the soundbar.
• Restart both the soundbar and the Bluetooth device.
• Remove the One Bar from your Bluetooth list and reconnect.

4. How do I adjust the sound settings?

• Use the Bass and Treble controls on the remote to customize sound output.
• Try the EQ presets (Music, Movie, News, 3D) for different listening experiences.

Conclusion

Setting up the Rockville One Bar Soundbar is simple and provides high-quality audio for TV, music, and gaming. Whether you’re using Bluetooth, HDMI ARC, Optical, or AUX, this soundbar is designed for easy integration with any home entertainment setup.