GO PARTY 6: How To Use The Line Out

Introduction

The Rockville Go Party 6 Portable LED Speaker allows you to link two speakers together using a simple AUX cable connection. This enables both speakers to play the same audio from a single source, such as a Bluetooth device, USB stick, or other media player. Follow these easy steps to set up a wired connection between two Go Party 6 speakers.

Step-by-Step Instructions

1. Gather Your Equipment

To link two Go Party 6 speakers, you will need:

• Two Go Party 6 speakers
• One 3.5mm AUX cable

2. Connect the Speakers

1. Locate the Line Output on your first Go Party 6 speaker.
2. Plug one end of the AUX cable into the Line Output of the first speaker.
3. Plug the other end into the AUX Input of the second speaker.

3. Play Audio on the First Speaker

• Connect your Bluetooth device, USB stick, or other media source to the first speaker.
• Play your music, and it will automatically transmit audio to the second speaker.

4. Adjusting Volume

• You can control the overall volume on each speaker separately.
• Lowering the volume on one speaker does not affect the other speaker’s volume.

5. Using a Microphone with the Setup

• If you plug a microphone into the first speaker, the audio will also play through the second speaker via the AUX connection.

Conclusion

Linking two Go Party 6 speakers with an AUX cable provides a simple and reliable way to expand your sound coverage. Whether you’re playing music or using a microphone, both speakers will work together seamlessly.