How To Set Up Your BPA15

Introduction

This guide will walk you through setting up your Rockville BPA15 15" Powered PA Speaker and will also apply to other speakers in the BPA series. Whether you're using a microphone, connecting multiple speakers, or pairing via Bluetooth, these steps will ensure a smooth setup.

What's Included:

• BPA15 Speaker (with a handle on top, two side handles, and wheels for easy transport)
• Power Cable
• Wireless Remote Control

Step-by-Step Instructions

1. Setting Up the Speaker

1. Place the speaker in your desired location.
2. If using a speaker stand, insert the 35mm pole socket at the bottom onto the stand and tighten the knob to secure it.
3. Plug the power cable into the power input on the speaker and connect it to an outlet.
4. Turn on the speaker using the power switch on the back.

2. Connecting a Microphone

1. Take an XLR cable and plug the female end into your microphone.
2. Plug the male end into the Mic Input (XLR or ¼” input) on the back of the speaker.
3. Turn up the Mic Volume Knob to your preferred level.
4. Adjust the EQ settings:
   • Treble Knob: Increases or decreases high-frequency sounds.
   • Bass Knob: Adjusts the low-end frequencies for more or less bass.

3. Connecting External Audio Sources

The BPA15 allows multiple audio sources to be connected:

• Aux Input (3.5mm): Connect an MP3 player or smartphone.
• RCA Inputs: Use for devices like CD players or turntables.
• XLR Line Input: Connects to another powered speaker or a mixer.

4. Connecting Multiple Speakers

To connect two BPA15 speakers together:

1. Use an XLR cable to connect the Line Output of the first speaker to the Line Input of the second speaker.
2. Adjust the Line Input Volume Knob on the second speaker to balance the sound.
3. If using a microphone on the first speaker, it will now also play through the second speaker.

5. Connecting a Powered Subwoofer

For extra bass, connect a powered subwoofer:

1. Use an XLR or ¼” cable to connect the XLR Line Output of the BPA15 speaker to the XLR Input on the subwoofer.
2. Adjust the subwoofer’s volume and crossover settings for optimal bass response.
3. You can mount the BPA15 speaker on a pole above the subwoofer for a clean setup.

6. Bluetooth Pairing

1. Ensure the speaker is turned on and set to Bluetooth mode (the Bluetooth symbol should flash).
2. On your smartphone or tablet, go to Bluetooth settings and search for "BPA15".
3. Select it to pair. The speaker will confirm the connection with a sound.
4. Raise the MP3 Volume Knob to hear music.

7. Wireless Stereo Pairing (TWS Mode)

To link two BPA15 speakers via True Wireless Stereo (TWS):

1. Pair one speaker to your Bluetooth device using the steps above.
2. Press and hold the TWS button on the first speaker.
3. When both speakers display "BT BT" on the screen, they are linked.
4. Raise the MP3 Volume Knob on both speakers.
5. Play music, and both speakers will output the sound wirelessly.

8. Using a Mixer with the BPA15

For a more advanced setup, you can connect the BPA15 to a passive mixer like the Rockville RockMix 10FX:

1. Take two XLR cables and connect their female ends to the mixer’s XLR outputs.
2. Connect the male ends into the XLR Line Inputs on both speakers.
3. Power on the mixer before turning on the speakers to avoid any popping noise.
4. Raise the Line Input Volume Knobs on the speakers.
5. Adjust the Main Mix Knob on the mixer for overall volume control.
6. Connect microphones and instruments to the mixer for full control over your sound.

Troubleshooting & FAQs

Why is there no sound from my speaker?

• Make sure the power switch is on.
• Ensure the volume knobs are turned up.
• If using Bluetooth, confirm the connection is active and raise the MP3 Volume Knob.
• Check if the input source (microphone, aux, RCA, etc.) is properly connected.

Why is my second speaker not producing sound when linked?

• If using a wired connection, raise the Line Input Volume Knob on the second speaker.
• If using TWS mode, ensure both speakers are in Bluetooth mode before pairing.

Why do I hear a popping sound when turning on my speakers?

• Always turn on your mixer first, then the speakers. Turning them on in reverse order may cause a popping noise.

How do I get more bass from my setup?

• Increase the Bass Knob on the speaker.
• Add a powered subwoofer using the XLR Line Output.
• Position the speaker properly (elevated on a stand or near a wall for natural bass enhancement).

Conclusion

Setting up your Rockville BPA15 Powered PA Speaker is simple, whether you’re using it solo, connecting multiple speakers, or integrating it into a professional audio setup. With multiple input options, Bluetooth connectivity, and True Wireless Stereo (TWS) mode, the BPA15 is a powerful, versatile speaker for any event.