RWM61U: How To Set Sp & Use

Introduction

In this guide, we’ll walk you through the setup process for the Rockville RWM 61U Wireless UHF Guitar and Headset Microphone System. This system is designed for singers, presenters, and musicians who need the freedom of a wireless microphone or guitar transmitter.

What’s in the Box?

• One-channel wireless receiver
• Bodypack transmitter (for microphone or guitar)
• Headset microphone
• 1/4-inch cable for microphone/guitar
• Antenna for the receiver
• Power supply for the receiver
• Batteries for the bodypack transmitter

Step 1: Connecting the Antenna to the Receiver

1. Locate the antenna input on the back of the receiver.
2. Line up the end of the antenna with the input and twist it to secure it in place.
3. Raise the antenna for better wireless signal reception.

Step 2: Setting Up the Wireless Bodypack

1. Pinch the sides of the bodypack transmitter to open the battery compartment.
2. Insert the included batteries and close the compartment.
3. Turn on the bodypack by pressing the power button on top.
4. The LCD screen will display:
   • Battery life
   • Preset frequency channel (already matched to the receiver for the clearest signal).

Step 3: Using the Headset Microphone

1. Take the headset microphone and plug it into the mic input on the top of the bodypack.
2. Place the bodypack on your belt or pocket.
3. Put on the headset and adjust the microphone for a comfortable fit.

Step 4: Connecting the Receiver to a Powered Speaker

1. Use the included 1/4-inch cable to connect the receiver to your speaker.
   • Plug one end into the 1/4-inch unbalanced output on the back of the receiver.
   • Plug the other end into the 1/4-inch input on your powered speaker.
2. Alternatively, use an XLR cable if your speaker has an XLR input.
3. Turn on the receiver and power on the speaker.
4. Raise the volume on the receiver and then adjust the speaker volume.
5. Test your microphone—you should now hear your voice through the speaker.

Wireless Range

• Indoors: 300-400 feet
• Outdoors: 250-350 feet

Step 5: Using the System with a Guitar and Guitar Amp

1. Use the included 1/4-inch instrument cable.
2. Plug the female end into the bodypack transmitter (same as the headset mic).
3. Plug the other end into your guitar’s output jack.
4. Use another 1/4-inch cable to connect the receiver to your guitar amp:
   • One end into the receiver’s 1/4-inch output.
   • The other end into your guitar amp’s input.
5. Turn on the bodypack, receiver, and amp.
6. Adjust the volume on your amp and guitar for optimal sound.

Benefit: This setup allows musicians to move freely on stage while playing.

Step 6: Connecting to a Mixer

1. Use a 1/4-inch or XLR cable to connect the receiver to the mixer.
   • 1/4-inch method: Plug one end into the receiver’s 1/4-inch output and the other into a mixer input.
   • XLR method (recommended):
     • Plug the female end of the XLR cable into the receiver’s XLR output.
     • Plug the male end into an input channel on the mixer.
2. Turn on the mixer and receiver.
3. Put on the headset microphone and turn on the bodypack.
4. Adjust the channel gain and volume faders on the mixer.
5. Raise the main left and right faders to hear the microphone output.

Why Use a Mixer?

• You can fine-tune the EQ for better sound quality.
• You can apply built-in effects like reverb or compression.

Step 7: Muting and Standby Mode

• Press the power button on the bodypack once to enter standby mode.
• This allows you to mute the microphone or guitar signal without turning off the transmitter.

Conclusion

The Rockville RWM 61U Wireless UHF Guitar & Headset Microphone System is a versatile and easy-to-use wireless system. Whether you’re a singer, public speaker, or guitarist, this setup provides clear audio, long-range wireless connectivity, and freedom to move on stage.