ASM4: How To Set Up w/ an Audio Interface

Introduction

Connecting an audio interface to your Rockville ASM4 speakers allows you to achieve high-quality sound output for music production, mixing, and general listening. This guide will walk you through the simple step-by-step setup.

What You Need

• Two TS cables (1/4" to 1/4")
• Audio Interface
• Laptop or Computer
• ASM4 Speakers

Step 1: Connect the Audio Interface to Your Computer

1. Plug the USB cable of your audio interface into your computer or laptop.
2. Make sure your computer recognizes the interface by checking its settings.

Step 2: Connect the ASM4 Speakers to the Interface

1. Take one end of a TS cable and plug it into the Left TS input on the back of the ASM4 speaker.
2. Take the other end and plug it into the Left output on the audio interface.
3. Repeat the same steps for the Right TS input and Right output.

Step 3: Set the Speaker Input Mode

1. Press the Volume button on the front of the ASM4 speaker to switch the source to TS mode.

Step 4: Adjust Your Computer’s Sound Settings

1. Open Sound Preferences on your laptop or computer.
2. Make sure the input and output device is set to your audio interface.

Step 5: Adjust Volume Levels

1. Raise the main volume knob on the ASM4 speakers.
2. Raise the main volume knob on the audio interface.
3. Now, all audio from your computer (playlists, DAW software, etc.) will play through the ASM4 speakers.

Conclusion

Setting up an audio interface with your ASM4 speakers is quick and easy. Whether you’re mixing tracks, producing music, or just enjoying high-quality playback, this setup ensures optimal audio performance.