ROCK SHAKER 15: How To Create A Home Studio Setup Your Powered Sub

Introduction: In this tutorial, we’ll walk you through the simple steps to set up your Rock Shaker 15 subwoofer with your home recording system. The Rock Shaker 15 can be connected to your audio interface using RCA to quarter-inch cables, making it easy to integrate into your setup. Let’s get started!

Step-by-Step Instructions:

1. Gather Your Equipment

• Rock Shaker 15 Subwoofer
• Audio Interface (with available quarter-inch outputs)
• RCA to Dual Quarter-Inch Cable

2. Connect the Cables

• Step 1: Take your RCA to dual quarter-inch cable.
• Step 2: Plug the quarter-inch ends of the cable into the quarter-inch outputs on the back of your audio interface.
• Step 3: Plug the RCA ends of the cable into the RCA inputs on the back of your Rock Shaker 15 subwoofer.

3. Check Your Sound Settings

• Step 1: Go into your computer’s sound settings and ensure that your audio interface is selected as both the input and output device.
• Step 2: Make sure the same interface is set as the input/output device in your digital audio workstation (DAW).

Conclusion:

Setting up your Rock Shaker 15 with your home recording setup is quick and simple. Just connect the cables, adjust your settings, and you’re ready to go!