Introduction: In this guide, we’ll walk you through the simple process of setting up your Rock Shaker 15 subwoofer to your TV. This setup is perfect for enhancing your home entertainment system, ensuring deep, rich bass alongside your existing audio.
Step-by-Step Instructions:
1. Connect the Subwoofer to Your TV
- RCA Cable Connection:
Begin by taking an RCA cable and plugging one end into the audio RCA output on the back of your TV.- Plug the other end of the RCA cable into the RCA input on the back of the Rock Shaker 15 subwoofer.
2. Adjust TV Sound Settings
- TV Sound Settings:
After making the physical connection, go into your TV's sound settings. Make sure the output device is set to the correct RCA output for the subwoofer.
3. Set Up Passive Speakers (Optional)
- Connect Passive Speakers:
If you'd like to also use passive speakers to hear the high-end frequencies, you can connect them to the subwoofer.- Unscrew the terminals for the high-level outputs on the subwoofer.
- Take two sets of speaker wire and connect one end to the left and right high-level outputs on the subwoofer.
- Ensure you keep track of which set is plugged into the left channel and which set is plugged into the right channel.
4. Final Adjustments to TV Sound Settings
- Double-Check RCA Output Settings:
Go back to your TV sound settings and confirm that the RCA output is selected as the audio output source.- Alternatively, you can use the RCA outputs of your subwoofer and connect them to the RCA inputs of your receiver. This allows you to route audio to both the subwoofer and your speaker system simultaneously.
Conclusion:
Setting up your Rock Shaker 15 subwoofer with your TV is an easy and effective way to enhance your home audio experience. By connecting the subwoofer using RCA cables, adjusting the sound settings, and optionally connecting passive speakers, you'll enjoy deep bass and full-range sound for all your media.
Comments
0 comments
Article is closed for comments.