ROCKFORCE 384: How To Set Up & Use

Introduction

The Rockville Rock Force 384 DMX Controller is one of the easiest DMX controllers to use while offering powerful features. It has 384 DMX channels, 30 banks of 8 programmable scenes, and 6 user-set chases. The unit can control up to 24 intelligent lights with up to 16 channels each. It features a steel chassis with rubber side grips for durability and portability.

Key Features

• 384 DMX Channels
• 30 Banks of 8 Programmable Scenes
• 6 User-Set Chases
• 24 Intelligent Lights Control (up to 16 channels per fixture)
• USB Power Source (for built-in lamp or MIDI controller)
• MIDI Input (control via a keyboard)
• Built-in Microphone (for music mode)
• Durable Steel Chassis with Rubber Side Grips

Step-by-Step Guide to Programming the Rock Force 384

Connecting Your Lights

1. Plug your DMX cables from the DMX output on the controller into your lighting fixtures.
2. Ensure your lights are set to the correct DMX channel mode.
3. Power on the Rock Force 384.

Recording a Scene

A scene is a static lighting setup that you can recall anytime.

Step 1: Enter Program Mode

1. Press the Program button – the LED will start flashing.
2. Adjust your light faders to create the desired scene.

Step 2: Save the Scene

1. Press MIDI/Add.
2. Press the Scene button where you want to save it (e.g., Scene 1).
3. The system will flash to confirm the scene has been saved.
4. Repeat for additional scenes (e.g., Scene 2 for green lights).

Creating a Chase Sequence

A chase is a sequence of multiple scenes that run automatically.

Step 1: Enter Chase Mode

1. Press MIDI/Add.
2. Select Chase 1.

Step 2: Add Scenes to the Chase

1. Select Scene 1, then press MIDI/Add to save it to the chase.
2. Select Scene 2, then press MIDI/Add again.
3. Repeat for additional scenes.

Step 3: Run the Chase

1. Press Chase 1 to activate it.
2. Press Auto to begin playback.
3. Adjust the Speed fader to control how fast scenes switch.

Using Music Mode

• The Rock Force 384 has a built-in microphone that reacts to sound.
• Activate Music Mode, and the controller will change scenes based on the beat.
• Adjust the sensitivity to fine-tune how the lights react to music.

Final Thoughts

The Rockville Rock Force 384 DMX Controller is a powerful yet user-friendly DMX controller, perfect for both beginners and professionals. It simplifies complex lighting setups while offering advanced programmability, MIDI control, and sound-reactive features.