RPG8 | RPG10 | RPG12 | RPG15: How To Set Up & Use

Introduction

The Rockville RPG series speakers are versatile, powerful, and perfect for live performances, band rehearsals, conferences, houses of worship, karaoke, and more. Available in 8-inch, 10-inch, 12-inch, and 15-inch models, these active speakers feature multiple mounting options, built-in EQ controls, and expandable connectivity.

This guide will walk you through setting up and using your RPG speakers, including how to connect a microphone, daisy-chain multiple speakers, and connect external audio sources.

Step 1: Mounting the Speaker

The RPG speakers can be mounted in several ways:

• On a table or surface (using the rubber feet).
• As a monitor wedge (placing it on the floor at an angle).
• On a speaker stand (using the 35mm pole socket on the bottom).

Mounting on a Speaker Stand

1. Set up the stand at your desired height.
2. Align the pole socket on the bottom of the speaker with the stand.
3. Slide the speaker onto the stand securely.
4. Tighten the knob on the back of the speaker to lock it in place.

Step 2: Powering On the Speaker

1. Take the included power cable.
2. Plug the female end into the power input on the back of the speaker.
3. Plug the male end into a wall outlet.
4. Ensure the voltage selector is set to the correct setting:
   • 115V (for the U.S.).
   • 230V (for other regions, if applicable).
5. Flip the power switch on.

Step 3: Connecting a Microphone

The RPG speakers have XLR and ¼-inch microphone inputs.

Using an XLR Microphone

1. Start with the volume knobs turned all the way down to prevent feedback.
2. Plug the female end of an XLR cable into the microphone.
3. Plug the male end of the XLR cable into the MIC IN (XLR input) on the speaker.
4. Slowly raise the channel volume and master volume to hear the microphone through the speaker.

Using a ¼-inch Microphone Input

1. Connect the ¼-inch end of an XLR-to-¼-inch cable into the MIC IN (¼-inch input).
2. Follow the same volume adjustment steps as above.

Tip: Use the 2-band EQ (Treble & Bass) to adjust your microphone tone:

• Increase Treble for crisp clarity.
• Increase Bass for deeper, fuller sound.

Step 4: Connecting External Audio Sources

The RPG speakers support multiple inputs for music playback or live sound mixing.

Using RCA Inputs for AUX Devices

1. Use an RCA to 3.5mm cable.
2. Plug the RCA ends into the LINE IN RCA inputs on the back of the speaker.
3. Plug the 3.5mm end into a phone, tablet, laptop, or MP3 player.
4. Adjust the volume on both the speaker and the connected device.

Using XLR or ¼-inch Line Inputs

1. Plug an XLR or ¼-inch cable into the LINE IN input.
2. Connect the other end to a mixer, instrument, or external audio source.

Step 5: Connecting Multiple Speakers (Daisy-Chaining)

To connect multiple RPG speakers, use the LINE OUT (XLR or ¼-inch outputs).

Daisy-Chaining with XLR Cables

1. Connect an XLR cable from the LINE OUT XLR output of the first speaker.
2. Plug the other end into the LINE IN XLR input of the second speaker.
3. Adjust the gain and volume on the second speaker.

Expanding the Setup with a Mixer

1. Connect a ¼-inch or XLR cable from the LINE OUT of the first RPG speaker to a mixer input.
2. Adjust the mixer’s channel fader and gain to control the sound.
3. Raise the main left/right output on the mixer to feed audio into multiple speakers and subwoofers.

Step 6: Preventing Audio Distortion

The RPG speakers include a Limit LED Light that alerts you when the volume is too high.

• If the Limit LED illuminates, the speaker is clipping or distorting.
• To prevent distortion:
  • Lower the master volume.
  • Adjust the gain knobs to a proper level.
  • Reduce bass and treble if needed.

Conclusion

Setting up your Rockville RPG speakers is simple and flexible for live performances, DJ events, rehearsals, and presentations. Whether using one speaker or daisy-chaining multiple units, you’ll get clear, powerful sound with customizable EQ settings.