PARTY STAND LED: How To Set Up & Use

Introduction

This guide will walk you through setting up your Rockville Party Stand LED Tripod Speaker Stands step by step. These stands not only provide sturdy support for your speakers but also feature built-in LED lights that can sync with music, adding an exciting visual element to your setup.

What's Included

Your Rockville Party Stand LED Tripod Speaker Stands package includes:

• 2 Speaker Stands with 20-foot USB cables attached
• 1 Control Module for LED light control
• 1 Power Supply for the control module
• 1 RF Wireless Remote to control the LED features
• 1 Travel Bag to store and transport the stands and accessories

Step-by-Step Setup

1. Setting Up the Speaker Stands

1. Unfold the Legs
   • Loosen the knob at the bottom of the stand.
   • Spread the legs out to your desired width for stability.
   • Tighten the knob back up to lock the legs in place.
2. Adjusting the Height
   • Loosen the knob in the middle of the stand.
   • Raise the mounting pole to your desired height.
   • Insert the safety pin into the hole that matches your chosen height.
   • Lower the pole slightly so the pin rests securely.
   • Tighten the knob to lock it in place.
3. Mounting the Speakers
   • Line up the hole on the bottom of the speaker with the top of the mounting pole.
   • Carefully place the speaker onto the stand, ensuring it sits securely.

2. Connecting the LED Lights

1. Plugging in the USB Cables
   • Take the USB cables attached to the stands.
   • Plug them into the USB ports on the control module.
   • The 20-foot cables allow flexibility in speaker placement.
2. Powering the LED Lights
   • Connect the power supply to the control module.
   • Plug the power supply into a power outlet to activate the lights.

3. Controlling the LED Light Modes

Once the LED lights are powered, you can control them using:

• The built-in microphone sensitivity knob (adjusts how the lights respond to music).
• The RF Wireless Remote (controls colors and effects).

LED Light Modes

• Mode 1: Music Beat Mode – Lights react to the beat of the music.
• Mode 2: Music Pulse Mode – Lights pulse in sync with the music.
• Mode 3: Solid Mode – Lights remain on in a single color of your choice.
• Mode 4: Fade Mode – Lights gradually fade in and out.
• Mode 5: Streaming Mode – Lights create a waterfall effect.
• Mode 6: Strobe Mode – Lights rapidly flash on and off.

Color Selection

You can manually select a color for the lights using the Color Select function:

• White
• Red
• Green
• Blue
• Yellow
• Light Blue
• Purple

Step 4: Packing Up the Stands

Once you're done using the stands:

1. Remove the speakers from the mounting poles.
2. Lower the stands by:
   • Removing the safety pin.
   • Loosening the height adjustment knob to retract the pole.
   • Tightening the knob once the pole is fully lowered.
3. Fold the legs by loosening the bottom knob, collapsing the legs, and re-tightening.
4. Store the stands in the travel bag, ensuring each stand fits in its designated pocket along with accessories.

Optional: Customizing Your Setup

For a sleek and elegant look, you can add Rockville RSC7W speaker scrims over the stands. These scrims diffuse the LED lights while providing a polished, professional appearance.

Conclusion

Setting up your Rockville Party Stand LED Tripod Speaker Stands is quick and easy. Whether you're using them for DJ gigs, parties, or live events, these stands provide excellent speaker support while enhancing the atmosphere with built-in LED lighting.