How To Set Up Your PKS40 2-Tier Keyboard Stand:

Introduction

The Rockville PKS40 Stand is a versatile and portable keyboard stand that includes a second-tier attachment, cable management holes, and an optional shelf for additional workspace. This guide will walk you through assembling, adjusting, and using your PKS40 stand, as well as breaking it down for storage or transport.

Step 1: Setting Up the Stand

1. Unfold the Legs
   • Pull up the first pair of legs until they lock in place.
   • Repeat for the second pair of legs until fully extended.
2. Adjust the Stand Height
   • Locate the knobs on each leg and loosen them.
   • Pull up on the legs to adjust to your desired height.
   • Use the white measurement lines as a guide.
   • (Optional) Attach the measurement stickers inside the legs to track height adjustments.
   • Once set, tighten the knobs to lock the height in place.
3. Ensure Stability on Uneven Floors
   • Loosen the knobs slightly, lift the stand until it is level, then re-tighten the knobs.

Step 2: Adjusting the Width of the Stand

1. Locate the knobs underneath the stand and loosen them.
2. Pull the sides apart to expand the width.
3. Once at the desired width, tighten the knobs to lock the position.
4. Tip: Adjusting the width provides extra space for larger keyboards or gear.

Step 3: Running Cables Through the Stand

• The side holes on the stand allow you to neatly route power cables, MIDI cables, or audio cables.
• Use cable management clips or Velcro straps to secure cables along the legs for a clean setup.

Step 4: Adding the Second Tier

1. Loosen the interior knobs on both sides of the stand.
2. Insert the two additional arms into the designated slots.
3. Tighten the knobs to lock the arms in place.
4. Adjust the angle and height of the second tier using the exterior knobs.
5. Ensure that the arms are secure before placing equipment on them.

Step 5: Attaching a Microphone with a Gooseneck Stand

1. Select a mounting position on the inner or outer frame of the stand.
2. Loosen the clamp on the gooseneck mic stand.
3. Slide the clamp onto the stand and tighten securely.
4. Attach your microphone to the stand.
5. Route the microphone cable through the stand’s cable holes for a cleaner setup.

Using a Condenser Microphone?

• Attach a shock mount instead of a mic clip.
• For improved audio clarity, attach a pop filter by clamping it to the gooseneck stand and positioning it in front of the mic.

Step 6: Adding a Shelf for More Workspace

1. Line up the P-Shelf accessory with the top of the stand.
2. Lower it into place until secure.
3. Use the shelf for laptops, audio interfaces, or other gear.
4. To remove the shelf, simply lift it off the stand.

Step 7: Breaking Down the Stand for Storage or Transport

1. Remove the Arms:
   • Loosen the interior knobs and pull out the second-tier arms.
2. Fold the Legs:
   • Place the stand upside down.
   • Loosen each leg knob, lower the legs, then tighten the knobs again.
3. Collapse the Stand:
   • Push the latches on the silver screws to fold in the legs.
   • Fold them in a specific order so they lie flush.
4. Pack Everything in the Included Bag:
   • Place the stand inside.
   • Store the second-tier arms and other accessories in the extra space.
   • Close the bag, and you're ready for storage or transport.

Conclusion

The Rockville PKS40 stand is easy to set up, adjust, and break down for transport. Whether you need a keyboard stand, a second-tier setup, or additional space for recording equipment, this stand provides stability, organization, and flexibility for any musician or performer.