RVSSA1: How To Set Up & Use

Introduction

This guide will show you how easy it is to mount wooden cabinet speakers, such as the Rockville KPS series, onto standard 35mm PA speaker stands or wall mounts using the Rockville RVSSA1 bracket. This solution is ideal for restaurants, bars, cafés, event halls, houses of worship, performance venues, and more.

Compatible Applications Include:

• Restaurants & Bars
• Cafés & Coffee Houses
• Retail Stores
• Event Halls & Venues
• Houses of Worship
• Live Performance Settings

What You Need:

• Rockville RVSSA1 Pole Adapter Bracket (includes screws)
• Wooden cabinet speaker (e.g., Rockville KPS series)
• 35mm PA speaker stand or wall mount
• Phillips head screwdriver or drill

Step-by-Step Instructions

Step 1: Preparing Your Speaker

For Rockville KPS Series Speakers:

1. Locate the two mounting screws on the bottom of your KPS speaker.
2. Using a Phillips head screwdriver, carefully remove these two screws.

Step 2: Attaching the RVSSA1 Bracket to Your Speaker

• Align the RVSSA1 bracket with the screw holes on the bottom of your KPS speaker.
• Insert the original screws through the bottom of the RVSSA1 bracket into your speaker.
• Securely tighten the screws using your screwdriver.

For Other Wooden Speakers (without pre-existing screw holes):

• Place the RVSSA1 bracket on the bottom center of your speaker.
• Using wood screws (not included), screw the bracket into the speaker cabinet at each of the four corner holes.
• Ensure the screws are tightened securely to keep the bracket firmly attached.

Important Note:
If your speaker is not wooden, consult your speaker manufacturer before drilling holes, as this could damage your speaker.

Step 3: Mounting Your Speaker onto a Stand

• With the RVSSA1 bracket attached, lift your speaker and carefully place the bracket onto any standard 35mm PA speaker stand or compatible wall mount.
• Use the hand-tightening knob on the side of the RVSSA1 bracket to securely lock your speaker into place on the stand.

Frequently Asked Questions (FAQs)

Q: Can I use this adapter with non-wooden speakers?

• It's recommended to contact your speaker manufacturer first. Drilling into non-wooden speakers may cause damage.

Q: Can this adapter fit any standard speaker stand?

• Yes, the RVSSA1 bracket is designed specifically for 35mm speaker stands or wall mounts.

Conclusion

You've successfully mounted your wooden cabinet speakers using the Rockville RVSSA1 bracket, ensuring optimal sound quality and versatility in your space.