RVSS4A: How To Set Up Two Speakers w/ DP Mount Attachment

Introduction

In this guide, we’ll show you how to mount two speakers onto the Rockville RVSS4A stand using a double speaker mount (DP Mount). This setup allows you to place two speakers on a single stand while maintaining stability and proper height adjustment.

What You’ll Need

• Rockville RVSS4A Speaker Stand
• Two Speakers
• Rockville DP Mount (Double Speaker Mount)

Step 1: Attaching the DP Mount

1. Loosen the knob on the side of the DP Mount.
2. Align the hole on the bottom of the DP Mount with the pole on top of the speaker stand.
3. Slide the mount onto the stand until it is fully seated.
4. Tighten the knob on the side of the DP Mount to secure it in place.

Step 2: Mounting the Speakers

1. Take the first speaker and align its pole socket with one of the mounting poles on the DP Mount.
2. Lower the speaker onto the pole and ensure it is properly seated.
3. Tighten the locking knob (if your speaker has one) to secure it.
4. Repeat the process for the second speaker on the other side of the DP Mount.

Step 3: Adjusting the Height

1. Use the Air Assist Button to safely raise the speakers to your preferred height.
2. Ensure the stand remains stable and that the combined weight does not exceed 154 lbs.

Conclusion

Mounting two speakers onto your Rockville RVSS4A stand is quick and easy with the DP Mount. This setup is perfect for live performances, events, and DJ setups where maximizing speaker placement is essential.