RWM-4US: How to Set Up & Use

Introduction

The Rockville RWM-4US Quad Wireless UHF Microphone System is perfect for live performances, DJ events, houses of worship, conferences, karaoke, and more. This system includes four wireless microphones, a four-channel receiver, and all the necessary accessories for a seamless setup. Follow the step-by-step instructions to set up your RWM-4US system for optimal performance.

What You’ll Need

• Rockville RWM-4US Quad Wireless UHF Microphone System
• Four wireless microphones
• Batteries for each microphone (included)
• Four antennas (included)
• Quarter-inch cable (included)
• Power supply (included)
• Powered speaker or powered mixer and passive speakers

Step-by-Step Instructions

1. Setting Up the Antennas

• Attach the four antennas to the back of the receiver.
• Raise the antennas to ensure the receiver picks up signals from the microphones.

2. Setting Up the Microphones

• Insert Batteries: Unscrew the end cap of each microphone to reveal the battery compartment. Insert the AA batteries with the positive side facing down.
• Reattach the End Cap: Secure the end cap back onto each microphone.
• Turn On the Microphones: Power on each microphone by pressing the power button. The LCD lights will turn on, confirming they are powered up.

3. Connecting the Receiver to a Powered Speaker

• Use the Quarter-Inch Cable: Plug one end of the included quarter-inch cable into the mix out quarter-inch output on the receiver. Plug the other end into the quarter-inch input on the powered speaker.
• Turn On the Powered Speaker: Set the volume to a low level.
• Raise the Receiver Volume: Adjust the volume knobs for each channel on the receiver.
• Test the Microphones: Turn on the microphones. You should hear the sound through the powered speaker. Adjust the volume on the receiver to fine-tune the sound.

4. Adjusting the Frequency

• The LCD display on the microphone shows its frequency. If you experience interference or dropouts, you can change the frequency using the frequency adjustment button on the microphone.
• There are 20 frequency channels to choose from, ensuring the clearest sound quality.

5. Setting Up the Microphones with a Powered Mixer

• Use XLR Cables: For more control over your sound, connect the receiver to a powered mixer using four XLR cables.
• Plug the female XLR ends into the balance A, B, C, and D outputs on the receiver.
• Plug the other ends into the mixer channels 1, 2, 3, and 4.
• Adjust the Mixer Settings: Turn on the mixer and raise the volume faders for each channel. Then, raise the main left and right faders to hear the sound through the speakers.
• Test the Microphones: Turn on each microphone, and you should hear the sound from both speakers. You can control each microphone’s volume using the faders on the mixer.

6. Using the Receiver’s LCD Display

• The LCD display on each microphone shows important information, including the battery life and the frequency it's set to.
• This makes it easy to monitor and adjust the system for optimal performance.

7. Microphone Range

• The wireless microphones can reach 300–400 feet indoors and 250–350 feet outdoors from the receiver, offering plenty of flexibility for movement during performances or events.

Conclusion

Setting up the Rockville RWM-4US Quad Wireless UHF Microphone System is quick and easy. Whether connecting to a powered speaker or a mixer, the system allows for high-quality sound and flexibility in both small and large events. With the ability to adjust frequencies and control sound via the receiver and mixer, you’ll have complete control over your performance.