How To Set Up Your PKS44

Introduction

The Rockville PKS44 stand is a robust and versatile solution for musicians, DJs, and performers, offering multiple tiers, adjustable arms, and accessory options. In this guide, we will walk you through the process of setting up the PKS44 stand, including attaching extra arms, a goose neck for a microphone, and adding a shelf for more convenience. These instructions will ensure a smooth and easy setup, even for beginners.

Step-by-Step Setup Guide

1. Unboxing and Initial Setup

• Upon unboxing, you will find the PKS44 stand, two additional arms for a second tier, a goose neck mic stand, a mic clip, a shelf for the first tier, and a carry bag for easy transportation.

2. Setting Up the Stand

1. Unfold the Legs:
   • Start by pulling up the legs one at a time. Ensure that you pull each leg all the way up until you hear a locking sound, indicating that it is securely in place.
2. Adjust the Height:
   • Loosen the knob on each leg to adjust the height.
   • As you raise the legs, you will notice measurement lines along the inside of each leg. These lines act as visual guides for setting the height.
   • (Optional) Attach the included measurement stickers next to these lines for numerical guidance. For example, raise the leg to the 16-inch notch for consistent height.
   • Tighten the knob once the desired height is set.
3. Level the Stand:
   • If you're setting up on uneven ground, loosen the knobs on the legs, adjust each leg until the stand is level, and tighten the knobs to lock the position.

3. Adjusting the Stand's Width

1. Loosen the knobs underneath the stand to adjust its width.
2. Pull or push each side of the stand until the desired width is achieved.
3. Once the width is set, tighten the knobs to secure the position.

4. Adding the Additional Arms for a Second Tier

1. Loosen the knob on the stand to allow the arms to extend.
2. Attach each arm to the stand by sliding them into the holes on the stand's frame.
3. Once the arms are inserted, tighten the knobs to lock them in place.
4. You can adjust the height of each arm by loosening the knob on the side and moving the arm up or down. Once set, tighten the knob to secure the arm in position.

5. Installing the Goose Neck Microphone Stand

1. Loosen the clamp on the goose neck mic stand.
2. Choose a location to attach the goose neck. You can place it along the back, side, or front of the stand (avoiding the top cushion and double braces).
3. Slide the goose neck into place and tighten the knob to secure it.
4. Adjust the goose neck’s position by raising it, bending it, or rotating it to your preference.
5. Attach the included mic clip to the end of the goose neck, then insert a dynamic microphone. Connect the microphone to your mixer or interface with an XLR cable.

6. Using a Condenser Microphone

1. If you’re using a condenser microphone, screw the shock mount onto the goose neck.
2. Pinch the sides of the shock mount to insert the condenser microphone.
3. Connect the mic to your audio equipment using an XLR cable.
4. For enhanced sound quality, attach a pop filter to the goose neck by loosening the clamp, positioning it in front of the microphone, and securing it in place.

7. Cable Management

• The stand features multiple holes for routing your cables neatly. Run XLR cables, power cables, and MIDI cables through these holes to keep your setup organized.
• To further organize your cables, you can use Velcro strips or cable management clips along the legs of the stand.

8. Adding the Shelf for a Tabletop Setup

1. To add the shelf to the first tier of the stand, line up the inside of the shelf with the top of the first tier.
2. Place the shelf down and ensure it is securely positioned. This shelf can be used for small items like phones, drinks, or additional gear while keeping the top tier free for larger equipment.

Breaking Down the Stand for Storage or Transport

1. Remove the Shelf and Goose Neck:
   • Start by loosening the knob for the goose neck mic stand to remove it from the stand.
   • Take off the goose neck and set it aside.
2. Remove the Arms:
   • Loosen the knobs on the arms and slide them out of the stand.
   • For further compactness, loosen the side knobs to collapse the arms.
3. Collapse the Legs:
   • Flip the stand upside down.
   • Push down on the hinge to collapse the legs inward.
   • Tighten the knobs to secure the collapsed legs.
4. Pack Everything into the Carry Bag:
   • Place the shelf, stand, arms, and goose neck in the carry bag. The bag includes a divider to keep items separate and prevent damage.
   • Zip up the bag and your stand is ready to go.

Conclusion

The Rockville PKS44 stand is easy to set up and customize, allowing for a wide range of setups for musicians and performers. With adjustable height, width, and the ability to add accessories like microphone stands and shelves, you can tailor it to your specific needs. By following these simple steps, you’ll have your stand ready for any performance or recording session.